StarbieHalfLifeTY

tyryang726·StarbieHalfLifeTY·HALF LIFE STARBIE schematics/HALF LIFE STARBIE.kicad_pcb

StarbieHalfLifeTY PCB layout, top view — open source ESP32 board by tyryang726

About the StarbieHalfLifeTY PCB

StarbieHalfLifeTY is an open source ESP32 PCB design by tyryang726, published on GitHub. It is a 2-layer board measuring 73 × 63 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Starbie project for half life

Starbie(SQUAREBIE) is a tiny motion-controlled digital pet with 3 gameplay buttons. Instead of pressing controls, you interact with it by physically moving the board. And there is also 2 buttons in the form of keyboard switches

What it is: Starbie is my first beginner/starter project for Half Life from hackclub. The creature on a small display will react to how you handle it. Tilting, moving, and otherwise checking in on your pet are meant to be part of the experience.

StarbieHalfLifeTY, from the project README
From the project README

Main components on the StarbieHalfLifeTY

StarbieHalfLifeTY bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
DHT11
U1
1
XIAO-ESP32-C3-SMD
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

StarbieHalfLifeTY design files

The KiCad project lives in the tyryang726/StarbieHalfLifeTY repository on GitHub; these links point at the commit this page was built from.

StarbieHalfLifeTY: common questions

What microcontroller does the StarbieHalfLifeTY use?

The StarbieHalfLifeTY is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the StarbieHalfLifeTY PCB?

The StarbieHalfLifeTY measures 73 × 63 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the StarbieHalfLifeTY?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the StarbieHalfLifeTY design files?

From the tyryang726/StarbieHalfLifeTY repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the StarbieHalfLifeTY design in my own project?

The repository has no license, so all rights stay with tyryang726. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the StarbieHalfLifeTY without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards