ESP32C3 Upper

ucb-bar·riskybear-PCB·riskybear_V2.0/ESP32C3_Upper/ESP32C3_Upper.kicad_pcb

ESP32C3 Upper PCB layout, top view — open source ESP32 board by ucb-bar

About the ESP32C3 Upper PCB

ESP32C3 Upper is an open source ESP32 PCB design by ucb-bar, published on GitHub. It is a 2-layer board measuring 60 × 60 mm, with 58 components from 28 distinct parts.

Its main chip is the ESP32-C6-WROOM-1, from the ESP32 family. Other key parts include the LD1117S33TR_SOT223 and LM22676MR-5. By type, the board carries 23 resistors, 11 capacitors, 7 switches, 7 diodes, 4 ICs and 3 connectors.

Main components on the ESP32C3 Upper

ESP32C3 Upper bill of materials (BOM)

58 components, 28 distinct parts.

QtyPartRefs
1
LD1117S33TR_SOT223
U1
1
LM22676MR-5
U2
1
ESP32-C6-WROOM-1
U3
1
~
U4
2
DNBT8105-7
Q1, Q2
1
Conn_01x02
J1
1
Conn_02x10_Odd_Even
J2
1
USB_C_Receptacle_USB2.0_14P
J3
1
5V Enable
SW1
2
SW_SPST
SW2, SW3
4
SW_Push
SW4, SW5, SW6, SW7
2
D
D1, D7
5
LED
D2, D3, D4, D5, D6
1
8.2uH
L1
1
10u
C1
1
100nF
C2
4
0.1u
C3, C5, C10, C11
1
22uF
C4
1
6.8uF
C6
1
10uF
C7
Show 8 more
QtyPartRefs
1
10nF
C8
1
120uF
C9
8
10k
R1, R6, R7, R15, R20, R21, R22, R23
1
6.2k
R2
1
1k
R3
2
2.2k
R4, R5
9
280
R8, R9, R10, R11, R13, R16, R17, R18 +1
2
5.1k
R12, R14

ESP32C3 Upper design files

The KiCad project lives in the ucb-bar/riskybear-PCB repository on GitHub; these links point at the commit this page was built from.

ESP32C3 Upper: common questions

What microcontroller does the ESP32C3 Upper use?

The ESP32C3 Upper is built around the ESP32-C6-WROOM-1, from the ESP32 family.

How big is the ESP32C3 Upper PCB?

The ESP32C3 Upper measures 60 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32C3 Upper?

58 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32C3 Upper design files?

From the ucb-bar/riskybear-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32C3 Upper design in my own project?

The repository has no license, so all rights stay with ucb-bar. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ESP32C3 Upper without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in riskybear-PCB

Similar boards