Spider Upper
ucb-bar·riskybear-PCB·riskybear_V1.0/ESP32C6_Controller/Spider_Upper/Spider_Upper.kicad_pcb
About the Spider Upper PCB
Spider Upper is an open source ESP32 PCB design by ucb-bar, published on GitHub. It is a 2-layer board measuring 63 × 63 mm, with 74 components from 29 distinct parts.
Its main chip is the ESP32-C6-WROOM-1, from the ESP32 family. Other key parts include the FT231XS, LM2675M-5 and LD1117S33TR_SOT223. By type, the board carries 26 resistors, 17 capacitors, 9 connectors, 8 ICs, 5 diodes and 4 transistors.
Main components on the Spider Upper
Spider Upper bill of materials (BOM)
74 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | FT231XS | SSOP-20_3.9x8.7mm_P0.635mm | U1, U3 |
| 1 | ~ | BNO055 | U2 |
| 2 | ESP32-C6-WROOM-1 | ESP32-C6-WROOM-1 | U4, U7 |
| 1 | LM2675M-5 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U6 |
| 1 | ~ | TSSOP-16-1EP_4.4x5mm_P0.65mm | U8 |
| 4 | DNBT8105-7 | SOT-23 | Q1, Q2, Q3, Q4 |
| 4 | Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Vertical | J1, J2, J3, J4 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 2 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_JAE_DX07S016JA1R1500 | J6, J7 |
| 2 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J8, J9 |
| 4 | SW_SPST | SW_SPST_B3U-1000P | SW1, SW2, SW3, SW4 |
| 1 | D | D_0805_2012Metric | D1 |
| 4 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2, D3, D4, D5 |
| 1 | 47uH | L_0805_2012Metric | L1 |
| 10 | 0.1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C4, C5, C10, C12, C14, C15 +2 |
| 2 | 10u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C9 |
| 1 | 100uF | C_0805_2012Metric | C6 |
| 1 | 10nF | C_0805_2012Metric | C7 |
| 1 | 68uF | C_0805_2012Metric | C8 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100nF | C_0805_2012Metric | C11 |
| 1 | 10uF | C_0805_2012Metric | C13 |
| 4 | 27 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R3, R4 |
| 6 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R11, R20, R21, R25, R26 |
| 1 | 5k | R_0805_2012Metric | R6 |
| 7 | 2.2k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8, R17, R19, R22, R23, R24 |
| 4 | 5.1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R10, R12, R13 |
| 3 | 280 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15, R16 |
| 1 | 180 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18 |
Spider Upper design files
The KiCad project lives in the ucb-bar/riskybear-PCB repository on GitHub; these links point at the commit this page was built from.
Spider Upper: common questions
What microcontroller does the Spider Upper use?
The Spider Upper is built around the ESP32-C6-WROOM-1, from the ESP32 family.
How big is the Spider Upper PCB?
The Spider Upper measures 63 × 63 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Spider Upper?
74 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the Spider Upper design files?
From the ucb-bar/riskybear-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Spider Upper design in my own project?
The repository has no license, so all rights stay with ucb-bar. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Spider Upper without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in riskybear-PCB
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k