13 open source boards using the MCP7940N-xSN
Real designs built with the MCP7940N-xSN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
VCU CM4
NTURacingTeam
100 × 90 mm445 parts4LNo license0ESP32
IoT Logger B
WestianPKl
94.7 × 71.8 mm135 parts2LNo license0ESP32
IoT Logger B
WestianPKl
94.7 × 71.8 mm135 parts2LNo license0ESP32
IoT Logger C
WestianPKl
94.7 × 71.8 mm97 parts2LNo license0PIC
Controle
mbouyer
83.6 × 76.7 mm81 parts2LBSD-3-Clause0Raspberry Pi
Raspberry Pi Pico Logger - Relay
WestianPKl
100.5 × 83 mm77 parts2LNo license0Centrale
mbouyer
70 × 110 mm38 parts2LBSD-2-Clause0RP2040/RP2350
Raspberry Pi Pico Logger
WestianPKl
51.5 × 83 mm33 parts2LNo license0ESP32
IoT Logger C
WestianPKl
94.7 × 71.8 mm97 parts2LNo license0Raspberry Pi
Raspberry Pi Pico Logger - Relay
WestianPKl
100.5 × 83 mm77 parts2LNo license0TI MSP430/CC
Fight Computer Motherboard - Ian Goldberg
UChicago-Space-Program
90.2 × 96 mm31 parts4LNo license1RP2040/RP2350
Raspberry Pi Pico Logger
WestianPKl
51.5 × 83 mm33 parts2LNo license0PanelGalexy250630 0
NTURacingTeam
157.9 × 158.1 mm98 parts4LNo license4
How designs wire the MCP7940N-xSN
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MCP7940N-xSN connects to, and the resistors, capacitors and other passives placed on it.
- The X1 pin has a crystal on 6 of 7 designs, most often 32.768 kHz.
- The X2 pin has a crystal on 6 of 7 designs, most often 32.768 kHz.
- The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 47 µF).
- The X1 pin has a capacitor to GND on 4 of 7 designs, most often 10 pF (then 12 pF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| X1pin 1 | Connected to: Signal 100% |
|
| X2pin 2 | Connected to: Signal 86% |
|
| VSSpin 4 | Connected to: GND 100% | — |
| SDApin 5 | Connected to: FM24CL16B 29%, PCA9306DCUR 29%, the microcontroller 29% |
|
| SCLpin 6 | Connected to: FM24CL16B 29%, PCA9306DCUR 29%, the microcontroller 29% |
|
| VCCpin 8 | Connected to: 3.3V 86% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PanelGalexy250630 0 by NTURacingTeam, Fight Computer Motherboard - Ian Goldberg by UChicago-Space-Program, Controle by mbouyer and Centrale by mbouyer.
The MCP7940N-xSN in open source designs
The gallery holds 13 open source boards using the MCP7940N-xSN from 7 GitHub repositories; a typical one measures about 94.7 × 83 mm and carries around 81 components.
77% are two-layer designs, the rest use four layers or more, and 15% carry an open source license.
The most starred is PanelGalexy250630 0 by NTURacingTeam.
Parts used alongside the MCP7940N-xSN
Microcontrollers on boards using the MCP7940N-xSN
What boards using the MCP7940N-xSN are built for
MCP7940N-xSN: common questions
Where can I find a MCP7940N-xSN reference design?
Each of the 13 boards on this page is a real design using the MCP7940N-xSN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the MCP7940N-xSN X1 pin connected?
The X1 pin has a crystal on 6 of 7 designs, most often 32.768 kHz. Counted from the KiCad layouts of 7 open source designs using the MCP7940N-xSN.
How is the MCP7940N-xSN X2 pin connected?
The X2 pin has a crystal on 6 of 7 designs, most often 32.768 kHz. Counted from the KiCad layouts of 7 open source designs using the MCP7940N-xSN.
What decoupling capacitors do designs use on the MCP7940N-xSN VCC pin?
The VCC pin has a decoupling capacitor on 6 of 7 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 7 open source designs using the MCP7940N-xSN.
What parts are used alongside the MCP7940N-xSN?
The AP63200WU, ATmega328PB-A, ESP32-C6-WROOM-1U, FM24CL16B and LTV-817S-TA1-C appear in the most repositories here.
Which microcontrollers do boards using the MCP7940N-xSN use?
Most are built on ESP32 (4), Raspberry Pi (2), RP2040/RP2350 (2) and PIC (1).
How big is a typical board using the MCP7940N-xSN?
The median is 94.7 × 83 mm, and 77% are two-layer designs.
What is the most popular open source board using the MCP7940N-xSN?
By GitHub stars, PanelGalexy250630 0 by NTURacingTeam, with 4 stars.
Can I simulate one of these boards using the MCP7940N-xSN before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.