4 open source boards using the MAX14662

Real designs built with the MAX14662, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The MAX14662 in open source designs

The gallery holds 4 open source boards using the MAX14662 from 3 GitHub repositories; a typical one measures about 63.1 × 66 mm and carries around 43 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Fight Computer Motherboard - Ian Goldberg by UChicago-Space-Program.

Microcontrollers on boards using the MAX14662

What boards using the MAX14662 are built for

MAX14662: common questions

Where can I find a MAX14662 reference design?

Each of the 4 boards on this page is a real design using the MAX14662. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MAX14662 use?

Most are built on RP2040/RP2350 (1) and TI MSP430/CC (1).

How big is a typical board using the MAX14662?

The median is 63.1 × 66 mm, and 0% are two-layer designs.

What is the most popular open source board using the MAX14662?

By GitHub stars, Fight Computer Motherboard - Ian Goldberg by UChicago-Space-Program, with 1 stars.

Can I simulate one of these boards using the MAX14662 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part