Flightcontroller
ukinori·flightcontroller
About the Flightcontroller PCB
Flightcontroller is an open source STM32 PCB design by ukinori, published on GitHub. It is a 4-layer board measuring 70 × 100 mm, with 129 components from 56 distinct parts.
Its main chip is the STM32H743VITX, from the STM32 family. Other key parts include the ICM-42688-P, BMI088, MB85RS64PNF-G-JNE1, BMP390 and TPS62162DSGR. By type, the board carries 42 capacitors, 41 resistors, 24 connectors, 9 ICs, 6 diodes and 2 switches.
It belongs with the robotics & motion, sensors and power & battery designs in this gallery.
From the project
STM32H743 VTOL/fixed-wing flight-controller hardware in KiCad 10: routed 4-layer PCB, schematics, BOM notes, connector pinouts and verification reports. Experimental prototype; PX4 port planned.
Custom four-layer flight-controller hardware for VTOL and fixed-wing aircraft, designed in KiCad 10 around the STM32H743VITx. The intended aircraft configuration is four lift motors, one cruise motor and up to five servos. The hardware has twelve output connectors, allowing spare channels.
Status: routed hardware prototype. PX4 integration is planned; this repository does not contain a completed PX4 board port, bootloader or flight-tested firmware. The board has not been electrically or flight qualified. Design-rule checks do not establish functional or flight safety.

Main components on the Flightcontroller
Flightcontroller bill of materials (BOM)
129 components, 56 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H743VITX STM32H743VITx | LQFP-100_14x14mm_P0.5mm | U1 |
| 2 | ICM-42688-P | LGA14_2P5X3X0P91_TDK | U2, U3 |
| 1 | BMI088 | Bosch_LGA-16_4.5x3mm_P0.5mm_LayoutBorder7x1y_ClockwisePinNumbering | U4 |
| 1 | MB85RS64PNF-G-JNE1 MB85RS64 RAMXEED | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | BMP390 | 10LGA_2X2X0p75_BOS | U6, U7 |
| 1 | TPS62162DSGR TPS62162DSG Texas Instruments | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias | U8 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U9 |
| 1 | MMBT3904 | SOT-23 | Q1 |
| 1 | ABM3-8.000MHZ-12-D4Y-T 8MHz Abracon | Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm | Y1 |
| 1 | SWD_CUSTOM_GH5 | JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_Horizontal | J1 |
| 1 | USB4105-GF-A USB_C_Receptacle_USB2.0_14P GCT | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J2 |
| 1 | DM3AT-SF-PEJM5 Micro_SD_Card Hirose | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J3 |
| 1 | 5V_REGULATED_INPUT | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 12 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J5, J6, J7, J8, J9, J10, J11, J12 +4 |
| 1 | RC_UART_GH6_NO_FLOW | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J17 |
| 1 | GPS_PIXHAWK_GPS2 | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J18 |
| 1 | TELEM_GH6_NO_FLOW | JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal | J19 |
| 1 | COMPASS_I2C4_5V | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J20 |
| 1 | AIRSPEED_I2C4_5V | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J21 |
| 1 | 1715721 SERVO_BEC_6V_INPUT Phoenix Contact | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J22 |
Show 36 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BATTERY_SENSE_ONLY | PinHeader_1x03_P2.54mm_Vertical | J23 |
| 1 | BUZZER_5V_20MA_MAX BUZZER_5V_20mA_MAX | JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal | J24 |
| 1 | JUMPER_2_OPEN Jumper_2_Open | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | RESET | SW_SPST_TL3342 | SW1 |
| 1 | SAFETY | SW_SPST_TL3342 | SW2 |
| 2 | SS14 | D_SMA | D2, D4 |
| 1 | SMBJ5.0A-E3/52 SMBJ5.0A Vishay | D_SMB | D3 |
| 1 | POWER_GREEN | LED_0603_1608Metric | D5 |
| 1 | STATUS_GREEN | LED_0603_1608Metric | D6 |
| 1 | 1N4148W | D_SOD-123 | D7 |
| 1 | BLM18PG121SN1D FerriteBead Murata | L_0603_1608Metric | FB1 |
| 1 | XAL4030-332MEC 3.3u Coilcraft | L_Coilcraft_XAL4030-XXX | L1 |
| 1 | 4MU7 4mu7 | C_0805_2012Metric | C1 |
| 19 | 100N 100n | C_0603_1608Metric | C2, C3, C4, C5, C6, C10, C12, C13 +11 |
| 3 | 1MU 1mu | C_0603_1608Metric | C7, C11, C14 |
| 2 | 2.2MU 2.2mu | C_0805_2012Metric | C8, C9 |
| 2 | GRM1885C1H180JA01D 18p Murata | C_0603_1608Metric | C15, C16 |
| 5 | GRM188R71E104KA01D 100n Murata | C_0603_1608Metric | C17, C21, C28, C31, C33 |
| 2 | GRM21BR71C225KA12L 2.2u Murata | C_0805_2012Metric | C18, C22 |
| 2 | 10NF 10nF | C_0603_1608Metric | C19, C20 |
| 1 | 10U 10u | C_0805_2012Metric | C23 |
| 1 | GRM31CR71A226KE15L 22u Murata | C_1206_3216Metric | C32 |
| 2 | GRM31CR71E106KA12L 10u Murata | C_1206_3216Metric | C34, C42 |
| 1 | 10U 10u | C_0603_1608Metric | C35 |
| 1 | 470u 16V | CP_Radial_D8.0mm_P3.50mm | C36 |
| 1 | 47 | R_0603_1608Metric | R1 |
| 8 | 10K 10k | R_0603_1608Metric | R2, R19, R36, R37, R38, R39, R40, R41 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R3, R4 |
| 5 | 47K 47k | R_0603_1608Metric | R5, R6, R7, R8, R9 |
| 4 | 4.7K 4.7k | R_0603_1608Metric | R10, R11, R12, R13 |
| 2 | 91k 1% | R_0603_1608Metric | R14, R15 |
| 1 | 10k 1% | R_0603_1608Metric | R16 |
| 4 | 1k | R_0603_1608Metric | R17, R18, R20, R21 |
| 1 | 2.2K 2.2k | R_0603_1608Metric | R22 |
| 1 | 100K 100k | R_0603_1608Metric | R23 |
| 12 | 100 | R_0603_1608Metric | R24, R25, R26, R27, R28, R29, R30, R31 +4 |
Flightcontroller design files
The KiCad project lives in the ukinori/flightcontroller repository on GitHub; these links point at the commit this page was built from.
Flightcontroller: common questions
What microcontroller does the Flightcontroller use?
The Flightcontroller is built around the STM32H743VITX, from the STM32 family.
How big is the Flightcontroller PCB?
The Flightcontroller measures 70 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Flightcontroller?
129 components, from 56 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Flightcontroller design files?
From the ukinori/flightcontroller repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Flightcontroller design in my own project?
The repository has no license, so all rights stay with ukinori. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Flightcontroller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k