Line sensor mini kes
ukmars·ukmarsbot·ecad/kicad/line-sensor-mini-kes/line-sensor-mini-kes.kicad_pcb
About the Line sensor mini kes PCB
Line sensor mini kes is an open source PCB design by ukmars, published on GitHub under the MIT license. It is a 2-layer board measuring 28.7 × 81.3 mm, with 24 components from 13 distinct parts.
By type, the board carries 12 resistors, 5 transistors, 5 diodes, 1 connector and 1 capacitor.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
A simple beginners multi purpose robot platform
This directory holds KiCad projects for Version 1.3 of UKMARSBOT and a number of sensor modules.
Note that V1.3 this is an untested version at present
You can find corresponding Gerber files, schematics and BOM files in the hardware section )
Members of the UK Micromouse and Robotics Society (UKMARS) are entitled to a complimentary set of boards upon joining as a perk of membership.
Line sensor mini kes bill of materials (BOM)
24 components, 13 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BC337 | TO-92_Inline_Wide_HandSolder | Q1 |
| 4 | BPW85C | Phototransistor_3mm_Vertical_Clear | Q3, Q5, Q6, Q8 |
| 1 | SENSORS | PinHeader_1x14_P2.54mm_Vertical | J1 |
| 3 | L-934F3C | LED_D3.0mm | D1, D3, D5 |
| 2 | LED | LED_D3.0mm | D6, D7 |
| 1 | 100UF 470uF | CP_Radial_D10.0mm_P2.50mm_P5.00mm | C1 |
| 1 | 390R 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 2 | 68R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5 |
| 1 | 2K0 68R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 2K0 390 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7 |
| 1 | 390R 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8 |
| 1 | 2K0 2k0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R11 |
| 5 | 2k0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13, R14, R16, R26, R27 |
Line sensor mini kes design files
The KiCad project lives in the ukmars/ukmarsbot repository on GitHub; these links point at the commit this page was built from.
Line sensor mini kes: common questions
How big is the Line sensor mini kes PCB?
The Line sensor mini kes measures 28.7 × 81.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Line sensor mini kes?
24 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Line sensor mini kes design files?
From the ukmars/ukmarsbot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Line sensor mini kes design in my own project?
Yes, under the terms of its MIT license, which ukmars chose for the repository.
More boards in ukmarsbot
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k