Ukmarsbot wall sensor advanced
ukmars·ukmarsbot·ecad/kicad/wall-sensor-advanced/ukmarsbot-wall-sensor-advanced.kicad_pcb
About the Ukmarsbot wall sensor advanced PCB
Ukmarsbot wall sensor advanced is an open source PCB design by ukmars, published on GitHub under the MIT license. It is a 2-layer board measuring 27.3 × 80 mm, with 28 components from 18 distinct parts.
By type, the board carries 14 resistors, 6 transistors, 5 diodes, 2 capacitors and 1 connector.
It belongs with the robotics & motion and sensors designs in this gallery.
From the project
A simple beginners multi purpose robot platform
Ukmarsbot wall sensor advanced bill of materials (BOM)
28 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | TEFT4300 | LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_IRGrey | Q1, Q2, Q3, Q4 |
| 2 | BC337 | TO-92_Inline_Wide_HandSolder | Q5, Q6 |
| 1 | Conn_01x14 | PinHeader_1x14_P2.54mm_Vertical_Longpads | J1 |
| 4 | SFH4545 | LED_D5.0mm_Horizontal_O6.35mm_Z3.0mm | D1, D2, D3, D4 |
| 1 | LED | LED_D3.0mm | D5 |
| 1 | 100UF 330uF, 16V | CP_Radial_D10.0mm_P2.50mm | C1 |
| 1 | 330uF, 16V | CP_Radial_D10.0mm_P2.50mm | C2 |
| 1 | 390R 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R1 |
| 1 | 10K 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R2 |
| 2 | 68R 10R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R3, R4 |
| 1 | 68R 1k8 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R5 |
| 2 | 2K0 1k8 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R6, R7 |
| 1 | 390R 1k8 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R8 |
| 1 | 390R 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R9 |
| 1 | 2K0 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R10 |
| 1 | 2K0 33 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R11 |
| 1 | 1k0 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R12 |
| 2 | 390R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_BIGPAD | R13, R14 |
Ukmarsbot wall sensor advanced design files
The KiCad project lives in the ukmars/ukmarsbot repository on GitHub; these links point at the commit this page was built from.
Ukmarsbot wall sensor advanced: common questions
How big is the Ukmarsbot wall sensor advanced PCB?
The Ukmarsbot wall sensor advanced measures 27.3 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ukmarsbot wall sensor advanced?
28 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ukmarsbot wall sensor advanced design files?
From the ukmars/ukmarsbot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Ukmarsbot wall sensor advanced design in my own project?
Yes, under the terms of its MIT license, which ukmars chose for the repository.
More boards in ukmarsbot
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k