Smart IoT Gateway Processor

Umer-Haseeb·Smart_IoT_Gateway_Processor_PCB

Smart IoT Gateway Processor PCB layout, top view — open source ESP32 board by Umer-Haseeb

About the Smart IoT Gateway Processor PCB

Smart IoT Gateway Processor is an open source ESP32 PCB design by Umer-Haseeb, published on GitHub. It is a 4-layer board measuring 67.7 × 71.9 mm, with 66 components from 27 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the AMS1117-3.3, STM32F407VGTx and MAX3485. By type, the board carries 18 resistors, 17 capacitors, 10 connectors, 4 ICs, 4 jumpers and 4 switches.

It belongs with the iot & wireless designs in this gallery.

From the project

A 4-layer PCB design for a Smart IoT Gateway built around the STM32F407VGTx microcontroller with ESP32-WROOM-32 WiFi/BLE module.

A 4-layer PCB design for a Smart IoT Gateway built around the STM32F407VGTx microcontroller with ESP32-WROOM-32 WiFi/BLE module.

- MCU: STM32F407VGTx (ARM Cortex-M4, LQFP-100) - WiFi/BLE: ESP32-WROOM-32 module - RS485: MAX3485 transceiver for industrial communication - Power: 5V USB-C input → AMS1117-3.3 LDO (3.3V rail) - Storage: Micro SD Card slot - Debug: SWD header, test points, status LEDs, push buttons - 4-layer PCB: F.Cu (signal), In1.Cu (power), In2.Cu (power), B.Cu (signal)

Main components on the Smart IoT Gateway Processor

Smart IoT Gateway Processor bill of materials (BOM)

66 components, 27 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U1
1
STM32F407VGTx
U2
1
ESP32-WROOM-32
U3
1
MAX3485
U4
1
Crystal
Y1
1
USB_C_Receptacle_USB2.0_14P
J1
3
Conn_01x04
J2, J4, J6
1
Screw_Terminal_01x03
J3
1
Conn_01x06
J5
1
Micro_SD_Card
J7
1
Conn_01x05
J8
2
Conn_01x03
J9, J10
1
1A
F1
4
Jumper_2_Small_Bridged
JP1, JP2, JP3, JP4
4
SW_Push
SW1, SW2, SW3, SW4
3
TestPoint
TP1, TP2, TP3
4
LED
D1, D2, D4, D5
3
10u
C1, C2, C15
10
100n
C3, C4, C6, C7, C8, C9, C13, C14 +2
1
C
C5
Show 7 more
QtyPartRefs
1
4.7u
C10
2
20p
C11, C12
2
5.1k
R1, R2
1
1k
R3
10
10k
R4, R5, R6, R7, R9, R12, R13, R14 +2
3
330
R8, R17, R18
2
4.7k
R10, R11

Smart IoT Gateway Processor design files

The KiCad project lives in the Umer-Haseeb/Smart_IoT_Gateway_Processor_PCB repository on GitHub; these links point at the commit this page was built from.

Smart IoT Gateway Processor: common questions

What microcontroller does the Smart IoT Gateway Processor use?

The Smart IoT Gateway Processor is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Smart IoT Gateway Processor PCB?

The Smart IoT Gateway Processor measures 67.7 × 71.9 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Smart IoT Gateway Processor?

66 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Smart IoT Gateway Processor design files?

From the Umer-Haseeb/Smart_IoT_Gateway_Processor_PCB repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Smart IoT Gateway Processor design in my own project?

The repository has no license, so all rights stay with Umer-Haseeb. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Smart IoT Gateway Processor without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards