Pihat
UMONS-GFA·pihat·hardware/pihat_template.kicad_pcb
About the Pihat PCB
Pihat is an open source Raspberry Pi PCB design by UMONS-GFA, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 65 × 56.5 mm, with 33 components from 28 distinct parts.
Its main chip is the Raspberry_Pi_+_Conn, from the Raspberry Pi family. Other key parts include the LM3489, CAT24C04WI-GT3, FDC5614P, LM1117IMPX-ADJ and DMMT5401. By type, the board carries 12 resistors, 8 capacitors, 5 ICs, 3 connectors, 2 diodes and 1 transistor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
This project is a template for a Raspberry Pi Hat that was build on the guide lines published on github by the Raspberry Pi foundation. This template is designed to make it easier for hardware developers to design there own Rasberry Pi hats. The template was designed as a comprim
This project is a template for a Raspberry Pi Hat that was build on the guide lines published on github by the Raspberry Pi foundation. This template is designed to make it easier for hardware developers to design there own Rasberry Pi hats. The template was designed as a comprimse of cost, solderabilty, and footprint. The board has about 80% of its space still avalible to the user. The board also provides typical voltages that are required in many projects. The board is also capable of powering the Raspberry Pi. This makes this template sutable for development in automotive, industrial and…
Main components on the Pihat
Pihat bill of materials (BOM)
33 components, 28 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM3489 | LM3489 | U1 |
| 1 | CAT24C04WI-GT3 | CAT24C04WI-GT3 | U2 |
| 1 | FDC5614P | sot23-6 | U3 |
| 1 | LM1117IMPX-ADJ | sot223 | U4 |
| 1 | DMMT5401 | sot23-6 | U5 |
| 1 | BSS138 | sot23 | Q1 |
| 1 | CONN_01X02 | pin_strip_2 | P1 |
| 1 | CONN_01X02 | mkds_1,5-2 | P2 |
| 1 | Raspberry_Pi_+_Conn | pin_socket_20x2 | P3 |
| 1 | JUMPER | r_0805 | JP1 |
| 1 | DIODESCH | do214aa | D1 |
| 1 | LED | Led_0603 | D3 |
| 1 | 22uH | inductor_smd_8x5mm | L1 |
| 1 | 50uf/50v | c_elec_6.3x7.7 | C1 |
| 4 | 0.1uf | c_0805 | C2, C4, C5, C7 |
| 1 | 1nf | c_0805 | C3 |
| 1 | 10uf/6.3V | c_elec_4x5.3 | C6 |
| 1 | 1uf | c_0805 | C8 |
| 1 | 1k | r_0805 | R1 |
| 1 | 24k | r_0805 | R2 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 3.9k | r_0805 | R3, R5 |
| 1 | 270 | r_0805 | R4 |
| 1 | 30k | r_0805 | R6 |
| 2 | 10k | r_0805 | R7, R11 |
| 1 | 390 | r_0805 | R8 |
| 1 | 240 | r_0805 | R9 |
| 1 | 360 | r_0805 | R10 |
| 1 | 47k | r_0805 | R12 |
Pihat design files
The KiCad project lives in the UMONS-GFA/pihat repository on GitHub; these links point at the commit this page was built from.
Pihat: common questions
What microcontroller does the Pihat use?
The Pihat is built around the Raspberry_Pi_+_Conn, from the Raspberry Pi family.
How big is the Pihat PCB?
The Pihat measures 65 × 56.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pihat?
33 components, from 28 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pihat design files?
From the UMONS-GFA/pihat repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Pihat design in my own project?
Yes, under the terms of its CERN-OHL-1.2 license, which UMONS-GFA chose for the repository.
Can I test firmware for the Pihat without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.
Similar boards
Raspberry Pi
Open source rover
nasa-jpl
220 × 178 mm144 parts2LApache-2.09.7kRaspberry Pi
Iot
dotnet
56 × 65 mm24 parts2LMIT2.4kRaspberry Pi
SPIRIT
SPIRIT-org
82 × 155 mm130 parts6LCERN-OHL-S-2.01.3kRaspberry Pi
CM5RevEng
schlae
55 × 40 mm417 parts10LNo license1.0kRaspberry Pi
Haxo hw
cardonabits
102.4 × 211.3 mm38 parts2LCustom license673Raspberry Pi
Phased
Neumi
75 × 100 mm71 parts2LNo license507