3 open source boards using the LM1117IMPX-ADJ

Real designs built with the LM1117IMPX-ADJ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The LM1117IMPX-ADJ in open source designs

The gallery holds 3 open source boards using the LM1117IMPX-ADJ from 3 GitHub repositories; a typical one measures about 93.8 × 56.5 mm and carries around 81 components.

100% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is PoEPi hardware by julien8.

Parts used alongside the LM1117IMPX-ADJ

Microcontrollers on boards using the LM1117IMPX-ADJ

What boards using the LM1117IMPX-ADJ are built for

LM1117IMPX-ADJ: common questions

Where can I find a LM1117IMPX-ADJ reference design?

Each of the 3 boards on this page is a real design using the LM1117IMPX-ADJ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the LM1117IMPX-ADJ?

The DMMT5401, FDC5614P and LM3489 appear in the most repositories here.

Which microcontrollers do boards using the LM1117IMPX-ADJ use?

Most are built on Raspberry Pi (3).

How big is a typical board using the LM1117IMPX-ADJ?

The median is 93.8 × 56.5 mm, and 100% are two-layer designs.

What is the most popular open source board using the LM1117IMPX-ADJ?

By GitHub stars, PoEPi hardware by julien8, with 46 stars.

Can I simulate one of these boards using the LM1117IMPX-ADJ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part