2 open source boards using the FDC5614P

Real designs built with the FDC5614P, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The FDC5614P in open source designs

The gallery holds 2 open source boards using the FDC5614P from 2 GitHub repositories; a typical one measures about 163 × 78.3 mm and carries around 119 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Slushengine modelx by Roboteurs.

Parts used alongside the FDC5614P

Microcontrollers on boards using the FDC5614P

What boards using the FDC5614P are built for

FDC5614P: common questions

Where can I find a FDC5614P reference design?

Each of the 2 boards on this page is a real design using the FDC5614P. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the FDC5614P?

The DMMT5401, LM1117IMPX-ADJ and LM3489 appear in the most repositories here.

Which microcontrollers do boards using the FDC5614P use?

Most are built on Raspberry Pi (2).

How big is a typical board using the FDC5614P?

The median is 163 × 78.3 mm, and 100% are two-layer designs.

What is the most popular open source board using the FDC5614P?

By GitHub stars, Slushengine modelx by Roboteurs, with 8 stars.

Can I simulate one of these boards using the FDC5614P before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part