HardLabs

GLVColoumbCounterTest

uvmaero·AERO-Boards-KiCad·BattMon/BattMonV1.0/GLVColoumbCounterTest.kicad_pcb

GLVColoumbCounterTest PCB layout, top view — open source AVR/Arduino board by uvmaero

About the GLVColoumbCounterTest PCB

GLVColoumbCounterTest is an open source AVR/Arduino PCB design by uvmaero, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 80.9 × 36.2 mm, with 43 components from 21 distinct parts.

Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the R-78E5.0-0.5, INA219, MCP2551-I-SN and MCP2515-IST. By type, the board carries 17 resistors, 11 capacitors, 6 ICs, 3 connectors, 3 diodes and 1 transistor.

From the project

UVM AERO boards.

This repo was originally @willemcvu 's personal AERO boards repo. From 2019-20 onward it will be used by all of AERO to store boards designed for the AERO cars.

Some are finished and have been produced, tested, etc. Others have not. Up to you to figure out if a particular board might be useful for your needs.

If you do produce a board, let me know! I'd love to know what you're using it for.

GLVColoumbCounterTest, from the project README
From the project README

Main components on the GLVColoumbCounterTest

R-78E5.0-0.5INA219ATmega328P-AUMCP2551-I-SNMCP2515-IST

GLVColoumbCounterTest bill of materials (BOM)

43 components, 21 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
R-78E5.0-0.5
U1
2
INA219
U2, U3
1
ATmega328P-AU
U4
1
MCP2551-I-SN
U5
1
MCP2515-IST
U6
1
MMBT222A
Q1
1
8MHz
Y1
1
12V_INTERFACE
J1
1
RJ45
J2
1
Conn_02x03_Odd_Even
J3
1
G5V-1
K1
2
LED
D1, D2
1
1N4148
D3
7
0.1uF
C1, C2, C4, C5, C6, C7, C11
2
10uF
C3, C8
2
22pF
C9, C10
4
0.02
R1, R8, R14, R16
1
100k
R2
3
1k
R3, R4, R5
5
10k
R6, R7, R13, R15, R17
Show 1 more
QtyPartRefs
4
10
R9, R10, R11, R12

GLVColoumbCounterTest design files

The KiCad project lives in the uvmaero/AERO-Boards-KiCad repository on GitHub; these links point at the commit this page was built from.

GLVColoumbCounterTest: common questions

What microcontroller does the GLVColoumbCounterTest use?

The GLVColoumbCounterTest is built around the ATmega328P-AU, from the AVR/Arduino family.

How big is the GLVColoumbCounterTest PCB?

The GLVColoumbCounterTest measures 80.9 × 36.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the GLVColoumbCounterTest?

43 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the GLVColoumbCounterTest design files?

From the uvmaero/AERO-Boards-KiCad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the GLVColoumbCounterTest design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which uvmaero chose for the repository.

Can I test firmware for the GLVColoumbCounterTest without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in AERO-Boards-KiCad

Similar boards