Adafruit Feather M4 Express CAN
UWCubeSat·propulsion-capstone-avionics·Adafruit-Feather-M4-CAN-PCB/Adafruit Feather M4 Express CAN.kicad_pcb
About the Adafruit Feather M4 Express CAN PCB
Adafruit Feather M4 Express CAN is an open source Microchip SAM PCB design by UWCubeSat, published on GitHub. It is a 2-layer board measuring 50.8 × 22.9 mm, with 58 components from 36 distinct parts.
Its main chip is the ATSAMD51J, from the Microchip SAM family. Other key parts include the TCAN1051HGV, AP3602, 2MB Flash, AP2112-3.3 and MCP73831T-2ACI/OT. By type, the board carries 16 capacitors, 12 resistors, 9 ICs, 4 crystals, 3 diodes and 2 jumpers.
It belongs with the dev boards & breakouts designs in this gallery.
Main components on the Adafruit Feather M4 Express CAN
Adafruit Feather M4 Express CAN bill of materials (BOM)
58 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TCAN1051HGV | SOIC8_150MIL | IC1 |
| 1 | AP3602 | SOT23-6 | IC3 |
| 1 | 2MB Flash | USON8 | U1 |
| 1 | AP2112-3.3 | SOT23-5@1 | U2 |
| 1 | MCP73831T-2ACI/OT | SOT23-5 | U3 |
| 1 | — | ADAFRUIT_2.5MM | U$1 |
| 1 | — | ADAFRUIT_3.5MM | U$12 |
| 1 | — | PCBFEAT-REV-040 | U$13 |
| 1 | ATSAMD51J | PQFN64-1 | U$14 |
| 1 | DMG341 | SOT23-R | Q3 |
| 1 | JSTPH | JSTPH2_BATT | X1 |
| 1 | 32.768 | XTAL3215 | X2 |
| 1 | 3.5mm | TERMBLOCK_1X3-3.5MM | X4 |
| 1 | USB Type C | USB_C_CUSB31-CFM2AX-01-X | X6 |
| 2 | — | @HOLE0, @HOLE1 | |
| 1 | — | 1X16_ROUND | JP1 |
| 1 | — | 1X12_ROUND | JP3 |
| 2 | — | SOLDERJUMPER_CLOSEDWIRE | SJ1, SJ2 |
| 1 | KMR2 | BTN_KMR2_4.6X2.8 | SW1 |
| 2 | — | TESTPOINT_ROUND_1.5MM | TP1, TP2 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ORANGE | CHIPLED_0603_NOOUTLINE | CHG0 |
| 1 | WS2812B3535 | LED3535 | LED1 |
| 1 | MBR540 | SOD-123 | D4 |
| 2 | TPB1,27 | B1,27 | D+1, D-1 |
| 1 | RED | CHIPLED_0603_NOOUTLINE | L0 |
| 1 | 10uH | INDUCTOR_1007 | L2 |
| 2 | 22pF | 0603-NO | C2, C4 |
| 3 | 10µF | 0805-NO | C3, C6, C8 |
| 3 | 10uF | 0805-NO | C5, C13, C17 |
| 6 | 1uF | 0603-NO | C7, C10, C11, C12, C14, C15 |
| 1 | 10uF | _0805MP | C16 |
| 1 | 1uF | 0805_10MGAP | C18 |
| 6 | 10K | 0603-NO | R2, R3, R4, R5, R6, R7 |
| 3 | 5.1K | 0603-NO | R8, R12, R13 |
| 1 | 100K | RESPACK_4X0603_NO | R9 |
| 2 | 60 ohm | 0805-NO | R10, R11 |
Adafruit Feather M4 Express CAN design files
The KiCad project lives in the UWCubeSat/propulsion-capstone-avionics repository on GitHub; these links point at the commit this page was built from.
Adafruit Feather M4 Express CAN: common questions
What microcontroller does the Adafruit Feather M4 Express CAN use?
The Adafruit Feather M4 Express CAN is built around the ATSAMD51J, from the Microchip SAM family.
How big is the Adafruit Feather M4 Express CAN PCB?
The Adafruit Feather M4 Express CAN measures 50.8 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Adafruit Feather M4 Express CAN?
58 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Adafruit Feather M4 Express CAN design files?
From the UWCubeSat/propulsion-capstone-avionics repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Adafruit Feather M4 Express CAN design in my own project?
The repository has no license, so all rights stay with UWCubeSat. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Adafruit Feather M4 Express CAN without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in propulsion-capstone-avionics
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416