3 open source boards using the 2MB Flash

Real designs built with the 2MB Flash, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The 2MB Flash in open source designs

The gallery holds 3 open source boards using the 2MB Flash from 3 GitHub repositories; a typical one measures about 50.8 × 91 mm and carries around 92 components.

67% use four copper layers or more, and 33% carry an open source license.

The most starred is Sentinel HYDRA by dhruv1859.

Microcontrollers on boards using the 2MB Flash

What boards using the 2MB Flash are built for

2MB Flash: common questions

Where can I find a 2MB Flash reference design?

Each of the 3 boards on this page is a real design using the 2MB Flash. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the 2MB Flash use?

Most are built on Microchip SAM (2) and RP2040/RP2350 (1).

How big is a typical board using the 2MB Flash?

The median is 50.8 × 91 mm, and 33% are two-layer designs.

What is the most popular open source board using the 2MB Flash?

By GitHub stars, Sentinel HYDRA by dhruv1859, with 0 stars.

Can I simulate one of these boards using the 2MB Flash before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part