2026 InClass 2Wheel Robot
uzm99·ENCE4231_UnaiZurbano·FinalProject_2WheelRobot/Projects/2026_InClass_2Wheel_Robot_kicad/2026_InClass_2Wheel_Robot_kicad.kicad_pcb
About the 2026 InClass 2Wheel Robot PCB
2026 InClass 2Wheel Robot is an open source STM32 PCB design by uzm99, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 31 components from 12 distinct parts.
Its main chip is the STM32F401RBTx, from the STM32 family. Other key parts include the LD1117S50TR_SOT223, LD1117S33TR_SOT223 and TB6612FNG. By type, the board carries 17 capacitors, 5 resistors, 4 ICs, 4 diodes and 1 connector.
It belongs with the robotics & motion designs in this gallery.
Main components on the 2026 InClass 2Wheel Robot
2026 InClass 2Wheel Robot bill of materials (BOM)
31 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401RBTx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | LD1117S50TR_SOT223 | SOT-223-3_TabPin2 | U2 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U4 |
| 1 | ~ | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J2 |
| 2 | 5V_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D3 |
| 1 | USER_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 11 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C5, C6, C8, C10, C12 +3 |
| 6 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C9, C11, C13, C15 |
| 3 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R5 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
2026 InClass 2Wheel Robot design files
The KiCad project lives in the uzm99/ENCE4231_UnaiZurbano repository on GitHub; these links point at the commit this page was built from.
2026 InClass 2Wheel Robot: common questions
What microcontroller does the 2026 InClass 2Wheel Robot use?
The 2026 InClass 2Wheel Robot is built around the STM32F401RBTx, from the STM32 family.
How big is the 2026 InClass 2Wheel Robot PCB?
The 2026 InClass 2Wheel Robot measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 2026 InClass 2Wheel Robot?
31 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the 2026 InClass 2Wheel Robot design files?
From the uzm99/ENCE4231_UnaiZurbano repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 2026 InClass 2Wheel Robot design in my own project?
The repository has no license, so all rights stay with uzm99. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 2026 InClass 2Wheel Robot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ENCE4231_UnaiZurbano
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k