20260428 2Wheel Balance Robot
uzm99·ENCE4231_UnaiZurbano·FinalProject_2WheelRobot/Projects/20260428_2Wheel_Balance_Robot/20260428_2Wheel_Balance_Robot.kicad_pcb
About the 20260428 2Wheel Balance Robot PCB
20260428 2Wheel Balance Robot is an open source STM32 PCB design by uzm99, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 56 components from 34 distinct parts.
Its main chip is the STM32F401RBTx, from the STM32 family. Other key parts include the TB6612FNG, LD1117S50TR_SOT223, USBLC6-2SC6 and LD1117S33TR_SOT223. By type, the board carries 22 capacitors, 10 resistors, 9 connectors, 5 ICs, 5 diodes and 3 switches.
It belongs with the robotics & motion designs in this gallery.
Main components on the 20260428 2Wheel Balance Robot
20260428 2Wheel Balance Robot bill of materials (BOM)
56 components, 34 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F401RBTx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | TB6612FNG | SSOP-24_5.3x8.2mm_P0.65mm | U2 |
| 1 | LD1117S50TR_SOT223 | SOT-223-3_TabPin2 | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U5 |
| 1 | LD1117S33TR_SOT223 | SOT-223-3_TabPin2 | U6 |
| 1 | 16MHz ABRACON | Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y3 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | CONN_MPU6050 | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | USB_C_Receptacle_USB2.0_14P Same Sky | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J3 |
| 1 | ESP_Conn | PinSocket_2x04_P2.54mm_Vertical | J4 |
| 1 | BATT_CONN | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | M1_CONN | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J6 |
| 1 | M2_CONN | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J7 |
| 1 | ENCODER_CONN | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J8 |
| 1 | MT6701_CONN | JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J9 |
| 1 | PTCSMD | Fuse_1812_4532Metric | F1 |
| 1 | REGULATOR_SWITCH | SW_SLW-66527511-SMT-TR | S3 |
| 1 | RST_SWITCH | SW_SLW-66527511-SMT-TR | S4 |
| 1 | SW_uP_Reset Wurth Elektronik | SW_uP_Reset | SW2 |
| 1 | WS2812B | LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1 |
Show 14 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | USB_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
| 1 | 3V3_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | USER_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | 5V_LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 12 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3, C4, C6, C8, C13, C14 +4 |
| 1 | 2.2uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 10uF | CP_EIA-6032-28_Kemet-C_HandSolder | C9 |
| 5 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C18, C23, C25 |
| 2 | 22p KYOCERA AVX | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C20 |
| 1 | 0.01uF KYOCERA AVX | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 4 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R6, R9, R10 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R17 |
| 2 | 22R | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4 |
| 2 | 5.1k Vishay / Dale | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7, R8 |
20260428 2Wheel Balance Robot design files
The KiCad project lives in the uzm99/ENCE4231_UnaiZurbano repository on GitHub; these links point at the commit this page was built from.
20260428 2Wheel Balance Robot: common questions
What microcontroller does the 20260428 2Wheel Balance Robot use?
The 20260428 2Wheel Balance Robot is built around the STM32F401RBTx, from the STM32 family.
How big is the 20260428 2Wheel Balance Robot PCB?
The 20260428 2Wheel Balance Robot measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 20260428 2Wheel Balance Robot?
56 components, from 34 distinct parts. The full bill of materials is listed on this page.
Where can I download the 20260428 2Wheel Balance Robot design files?
From the uzm99/ENCE4231_UnaiZurbano repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 20260428 2Wheel Balance Robot design in my own project?
The repository has no license, so all rights stay with uzm99. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 20260428 2Wheel Balance Robot without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ENCE4231_UnaiZurbano
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k