13 open source boards using the STM32F401RBTx
Real designs built with the STM32F401RBTx, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
StandAlone-Adapter
gianlucarenzi
78.7 × 58.4 mm51 parts2LGPL-3.047STM32
Lboard2
electrodyssey
203.2 × 101.6 mm214 parts4LLGPL-3.07STM32
Stm32f4-dev board
samjkent
98.5 × 38.1 mm58 parts2LNo license0STM32
2026 12 2Wheel Balance Robot v1
nruth633
68.6 × 53.4 mm56 parts2LNo license0STM32
20260428 2Wheel Balance Robot
uzm99
100 × 100 mm56 parts2LNo license0STM32
Power supply
ericmullally
59.7 × 65 mm52 parts4LMIT0STM32
20260430 2Wheel Balance Robot
uzm99
81.3 × 55.9 mm56 parts2LNo license0STM32
V2 bot embedded
nruth633
68.6 × 53.4 mm56 parts2LNo license0STM32
2026 12 2Wheel Balance Robot v1
cshieldsce
68.6 × 53.4 mm55 parts2LNo license0STM32
20260501 2Wheel Balance Robot
uzm99
81.3 × 55.9 mm56 parts2LNo license0ESP8266
2026 InClass Balancing Robot
cshieldsce
157.4 × 86.9 mm55 parts2LNo license0- schematic only · 56 partsSTM32
Balancing robot ruth
nruth633
56 parts2LNo license0 STM32
2026 InClass 2Wheel Robot
uzm99
100 × 100 mm31 parts2LNo license0
How designs wire the STM32F401RBTx
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the STM32F401RBTx connects to, and the resistors, capacitors and other passives placed on it.
- The VDD_32 pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF).
- The VDD_48 pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF).
- The RCC_OSC_IN_5 pin has a capacitor to GND on 6 of 7 designs, most often 22 pF (then 20 pF).
- The NRST_7 pin has a capacitor to GND on 6 of 7 designs, most often 100 nF (then 10 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBAT_1pin 1 | Connected to: Not connected 57% · 3.3V 43% |
|
| PC14_3pin 3 | Connected to: Not connected 71% · a signal 29% | — |
| PC15_4pin 4 | Connected to: Not connected 71% · a signal 29% | — |
| RCC_OSC_IN_5pin 5 | Connected to: Signal 86% |
|
| RCC_OSC_OUT_6pin 6 | Connected to: Signal 86% |
|
| NRST_7pin 7 | Connected to: A connector 43% |
|
| PC0_8pin 8 | Connected to: Not connected 71% · a signal 29% | — |
| VSSA_12pin 12 | Connected to: GND 86% | — |
| VREF+_13pin 13 | Connected to: 3.3V 71% |
|
| VSS_18pin 18 | Connected to: GND 86% | — |
| VDD_19pin 19 | Connected to: 3.3V 100% |
|
| PC4_24pin 24 | Connected to: Not connected 71% · a signal 29% | — |
| PC5_25pin 25 | Connected to: Not connected 71% · a signal 29% | — |
| PB0_26pin 26 | Connected to: Not connected 71% · a signal 29% | — |
| PB10_29pin 29 | Connected to: Not connected 86% | — |
| VCAP1_30pin 30 | Connected to: Signal 86% |
|
| VSS_31pin 31 | Connected to: GND 86% | — |
| VDD_32pin 32 | Connected to: 3.3V 100% |
|
| PB12_33pin 33 | Connected to: Not connected 86% | — |
| PB13_34pin 34 | Connected to: Not connected 86% | — |
| PB14_35pin 35 | Connected to: Not connected 86% | — |
| PB15_36pin 36 | Connected to: Not connected 86% | — |
| PC7_38pin 38 | Connected to: Not connected 86% | — |
| PC8_39pin 39 | Connected to: Not connected 86% | — |
| USB_OTG_FS_DM_44pin 44 | Connected to: Signal 71% · not connected 29% |
|
| USB_OTG_FS_DP_45pin 45 | Connected to: Signal 71% · not connected 29% |
|
| VSS_47pin 47 | Connected to: GND 86% | — |
| VDD_48pin 48 | Connected to: 3.3V 100% |
|
| PA15_50pin 50 | Connected to: Not connected 71% · a signal 29% | — |
| PC10_51pin 51 | Connected to: Not connected 86% | — |
| PC11_52pin 52 | Connected to: Not connected 86% | — |
| PC12_53pin 53 | Connected to: Not connected 86% | — |
| PD2_54pin 54 | Connected to: Not connected 86% | — |
| PB4_56pin 56 | Connected to: Not connected 71% · a signal 29% | — |
| PB5_57pin 57 | Connected to: Not connected 71% · a signal 29% | — |
| BOOT0_60pin 60 | Connected to: Signal 100% |
|
| VSS_63pin 63 | Connected to: GND 86% | — |
| VDD_64pin 64 | Connected to: 3.3V 100% |
|
26 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include StandAlone-Adapter by gianlucarenzi, Lboard2 by electrodyssey, 2026 12 2Wheel Balance Robot v1 by cshieldsce and Power supply by ericmullally.
The STM32F401RBTx in open source designs
The gallery holds 13 open source boards using the STM32F401RBTx from 7 GitHub repositories; a typical one measures about 81.3 × 57.1 mm and carries around 56 components.
85% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.
The most starred is StandAlone-Adapter by gianlucarenzi.
Parts used alongside the STM32F401RBTx
What boards using the STM32F401RBTx are built for
STM32F401RBTx: common questions
Where can I find a STM32F401RBTx reference design?
Each of the 13 boards on this page is a real design using the STM32F401RBTx. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the STM32F401RBTx VDD_32 pin?
The VDD_32 pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F401RBTx.
What decoupling capacitors do designs use on the STM32F401RBTx VDD_48 pin?
The VDD_48 pin has a decoupling capacitor on 7 of 7 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 7 open source designs using the STM32F401RBTx.
How is the STM32F401RBTx RCC_OSC_IN_5 pin connected?
The RCC_OSC_IN_5 pin has a capacitor to GND on 6 of 7 designs, most often 22 pF (then 20 pF). Counted from the KiCad layouts of 7 open source designs using the STM32F401RBTx.
What parts are used alongside the STM32F401RBTx?
The USBLC6-2SC6, LD1117S33TR_SOT223, LD1117S50TR_SOT223 and TB6612FNG appear in the most repositories here.
Which microcontrollers do boards using the STM32F401RBTx use?
Most are built on STM32 (12) and ESP8266 (1).
How big is a typical board using the STM32F401RBTx?
The median is 81.3 × 57.1 mm, and 85% are two-layer designs.
What is the most popular open source board using the STM32F401RBTx?
By GitHub stars, StandAlone-Adapter by gianlucarenzi, with 47 stars.
Can I simulate one of these boards using the STM32F401RBTx before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.