20260430 2Wheel Balance Robot

uzm99·ENCE4231_UnaiZurbano·FinalProject_2WheelRobot/Projects/20260430_2Wheel_Balance_Robot/20260430_2Wheel_Balance_Robot.kicad_pcb

20260430 2Wheel Balance Robot PCB layout, top view — open source STM32 board by uzm99

About the 20260430 2Wheel Balance Robot PCB

20260430 2Wheel Balance Robot is an open source STM32 PCB design by uzm99, published on GitHub. It is a 2-layer board measuring 81.3 × 55.9 mm, with 56 components from 34 distinct parts.

Its main chip is the STM32F401RBTx, from the STM32 family. Other key parts include the TB6612FNG, LD1117S50TR_SOT223, USBLC6-2SC6 and LD1117S33TR_SOT223. By type, the board carries 22 capacitors, 10 resistors, 9 connectors, 5 ICs, 5 diodes and 3 switches.

It belongs with the robotics & motion designs in this gallery.

Main components on the 20260430 2Wheel Balance Robot

20260430 2Wheel Balance Robot bill of materials (BOM)

56 components, 34 distinct parts.

QtyPartRefs
1
STM32F401RBTx
U1
1
TB6612FNG
U2
1
LD1117S50TR_SOT223
U3
1
USBLC6-2SC6
U5
1
LD1117S33TR_SOT223
U6
1
16MHz
ABRACON
Y3
1
Conn_01x04
J1
1
CONN_MPU6050
J2
1
USB_C_Receptacle_USB2.0_14P
Same Sky
J3
1
ESP_Conn
J4
1
BATT_CONN
J5
1
M1_CONN
J6
1
M2_CONN
J7
1
ENCODER_CONN
J8
1
MT6701_CONN
J9
1
PTCSMD
F1
1
REGULATOR_SWITCH
S3
1
RST_SWITCH
S4
1
SW_uP_Reset
Wurth Elektronik
SW2
1
WS2812B
D1
Show 14 more
QtyPartRefs
1
USB_LED
D2
1
3V3_LED
D3
1
USER_LED
D4
1
5V_LED
D5
12
0.1uF
C1, C2, C3, C4, C6, C8, C13, C14 +4
1
2.2uF
C7
1
10uF
C9
5
10uF
C15, C16, C18, C23, C25
2
22p
KYOCERA AVX
C19, C20
1
0.01uF
KYOCERA AVX
C21
4
1k
R1, R6, R9, R10
2
10k
R2, R17
2
22R
R3, R4
2
5.1k
Vishay / Dale
R7, R8

20260430 2Wheel Balance Robot design files

The KiCad project lives in the uzm99/ENCE4231_UnaiZurbano repository on GitHub; these links point at the commit this page was built from.

20260430 2Wheel Balance Robot: common questions

What microcontroller does the 20260430 2Wheel Balance Robot use?

The 20260430 2Wheel Balance Robot is built around the STM32F401RBTx, from the STM32 family.

How big is the 20260430 2Wheel Balance Robot PCB?

The 20260430 2Wheel Balance Robot measures 81.3 × 55.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 20260430 2Wheel Balance Robot?

56 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the 20260430 2Wheel Balance Robot design files?

From the uzm99/ENCE4231_UnaiZurbano repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the 20260430 2Wheel Balance Robot design in my own project?

The repository has no license, so all rights stay with uzm99. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the 20260430 2Wheel Balance Robot without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ENCE4231_UnaiZurbano

Similar boards