NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz
uzzambutt·NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz
About the NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz PCB
NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz is an open source ESP32 PCB design by uzzambutt, published on GitHub. It is a 4-layer board measuring 18.2 × 24.1 mm, with 46 components from 29 distinct parts.
Its main chip is the ESP32-C3, from the ESP32 family. Other key parts include the SX1280IMLTRT, 3.3V, 500mA and SE2431L. By type, the board carries 22 capacitors, 9 resistors, 4 ICs, 3 connectors, 3 inductors and 2 crystals.
It belongs with the rf & radio and iot & wireless designs in this gallery.
From the project
The NorthernStudios Nano 2.4 GHz ExpressLRS Diversity Receiver is engineered for long-range, high-reliability UAV control links, telemetry backhaul, and high-interference drone racing / freestyle environments. Combining high-efficiency RISC-V computing with Semtech's SX1280 trans
The NorthernStudios Nano 2.4 GHz ExpressLRS Diversity Receiver is engineered for long-range, high-reliability UAV control links, telemetry backhaul, and high-interference drone racing / freestyle environments. Combining high-efficiency RISC-V computing with Semtech's SX1280 transceiver and Skyworks' SE2431L front-end module, it provides industrial-grade packet reception sensitivity, +20 dBm (100 mW) telemetry uplink, and seamless over-the-air firmware management.

Main components on the NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz
NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz bill of materials (BOM)
46 components, 29 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-C3 | QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U1 |
| 1 | SX1280IMLTRT | XCVR_SX1280IMLTRT | U2 |
| 1 | 3.3V, 500mA | TSOT-23-5 | U3 |
| 1 | SE2431L | QFN-24-1EP_3x4mm_P0.4mm_EP1.65x2.65mm | U6 |
| 1 | 52MHz, 8pF | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 40MHz, 8pF | Crystal_SMD_2520-4Pin_2.5x2.0mm | Y2 |
| 2 | Conn_Coaxial | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J1, J2 |
| 1 | Conn_01x04_Male | JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal | J7 |
| 1 | Antenna_Chip | Johanson_2450AT18x100 | AE1 |
| 1 | 2450FM07D0034 | 2450FM07D0034 | FL1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 2 | 3nH | L_0402_1005Metric | L1, L2 |
| 1 | 15uH | L_0805_2012Metric | L3 |
| 4 | 1uF | C_0402_1005Metric | C1, C16, C19, C22 |
| 1 | 2.2uF | C_0402_1005Metric | C2 |
| 2 | 10pF | C_0402_1005Metric | C3, C5 |
| 3 | 100nF | C_0402_1005Metric | C4, C11, C12 |
| 4 | 1.2pF | C_0402_1005Metric | C6, C7, C8, C9 |
| 2 | 10nF | C_0402_1005Metric | C10, C13 |
| 1 | 470nF | C_0402_1005Metric | C14 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10uF | C_0402_1005Metric | C15 |
| 2 | 0.1uF | C_0402_1005Metric | C17, C18 |
| 2 | 12pF | C_0402_1005Metric | C20, C21 |
| 1 | 100k | R_0402_1005Metric | R1 |
| 1 | 2.2k | R_0402_1005Metric | R2 |
| 1 | 1.2k | R_0402_1005Metric | R3 |
| 4 | 10k | R_0402_1005Metric | R4, R6, R7, R9 |
| 1 | 0R | R_0201_0603Metric | R5 |
| 1 | 1k | R_0201_0603Metric | R8 |
NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz design files
The KiCad project lives in the uzzambutt/NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz repository on GitHub; these links point at the commit this page was built from.
- LayoutNS ELRS RX MICRO.kicad_pcb
- SchematicNS ELRS RX MICRO.kicad_sch
NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz: common questions
What microcontroller does the NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz use?
The NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz is built around the ESP32-C3, from the ESP32 family.
How big is the NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz PCB?
The NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz measures 18.2 × 24.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz?
46 components, from 29 distinct parts. The full bill of materials is listed on this page.
Where can I download the NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz design files?
From the uzzambutt/NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz design in my own project?
The repository has no license, so all rights stay with uzzambutt. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the NorthernStudios-RX-Micro-ELRS-Receiver-2.4GHz without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k