2 open source boards using the SE2431L

Real designs built with the SE2431L, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

2 boardsClear filters|Most starred

The SE2431L in open source designs

The gallery holds 2 open source boards using the SE2431L from 2 GitHub repositories; a typical one measures about 27.9 × 30.9 mm and carries around 45 components.

100% use four copper layers or more, and 50% carry an open source license.

The most starred is Single radio pcb by AnyLeaf.

Microcontrollers on boards using the SE2431L

What boards using the SE2431L are built for

SE2431L: common questions

Where can I find a SE2431L reference design?

Each of the 2 boards on this page is a real design using the SE2431L. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the SE2431L use?

Most are built on ESP32 (1) and ESP8266 (1).

How big is a typical board using the SE2431L?

The median is 27.9 × 30.9 mm, and 0% are two-layer designs.

What is the most popular open source board using the SE2431L?

By GitHub stars, Single radio pcb by AnyLeaf, with 65 stars.

Can I simulate one of these boards using the SE2431L before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part