Battery hot swap top
valex2·poseidon·0-Gen2/1-PCBs/Battery_hot_swap_top/Battery_hot_swap_top.kicad_pcb
About the Battery hot swap top PCB
Battery hot swap top is an open source PCB design by valex2, published on GitHub. It is a 2-layer board measuring 35 × 44 mm, with 8 components from 6 distinct parts.
By type, the board carries 4 connectors, 2 diodes and 2 resistors.
It belongs with the power & battery designs in this gallery.
From the project
Stanford Robosub Electrical Repository
DO NOT RUN FOR MORE THAN 10 SECONDS WHILE OUTSIDE OF WATER
Use serial library in Python, and write as follows: > portName.write(b"thrusternumber delayvalue")
Battery hot swap top bill of materials (BOM)
8 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 1135333 Conn_01x02_Pin Pheonix Contact | AMASS_XT60-M_1x02_P7.20mm_Vertical | J1, J3 |
| 2 | 1135333 Conn_01x02_Pin Pheonix Contact | AMASS_XT60-F_1x02_P7.20mm_Vertical | J2, J4 |
| 1 | 1SMA5931BT3 LED onsemi | LED_D4.0mm | D1 |
| 1 | IR26-21C_L110_TR8 LED Everlight Electronics Co Ltd | LED_D4.0mm | D2 |
| 1 | 10K 740 YAGEO | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 740 TE Connectivity Passive Product | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
Battery hot swap top design files
The KiCad project lives in the valex2/poseidon repository on GitHub; these links point at the commit this page was built from.
Battery hot swap top: common questions
How big is the Battery hot swap top PCB?
The Battery hot swap top measures 35 × 44 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Battery hot swap top?
8 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Battery hot swap top design files?
From the valex2/poseidon repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Battery hot swap top design in my own project?
The repository has no license, so all rights stay with valex2. Use it as a reference, and ask the author before reusing the design.
More boards in poseidon
NXP
MLU BreakoutV2
valex2
129.3 × 99 mm138 parts4LNo license1Power ManagementV2
valex2
111 × 110.5 mm129 parts2LNo license1Power Distribution
valex2
130 × 61 mm68 parts2LNo license1Robosub Power
valex2
120 × 60 mm45 parts2LNo license1NXP
Robosub teensy
valex2
120 × 64 mm27 parts4LNo license1Battery hot swap
valex2
34.4 × 88 mm13 parts2LNo license1
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kControllerCurrentShuntAddOn
stuartpittaway
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k