HardLabs

Esp atx power

valletw·esp-atx-power·kicad/esp-atx-power.kicad_pcb

Esp atx power PCB layout, top view — open source ESP32 board by valletw

About the Esp atx power PCB

Esp atx power is an open source ESP32 PCB design by valletw, published on GitHub under the MIT license. It is a 4-layer board measuring 76.6 × 25.1 mm, with 51 components from 28 distinct parts.

Its main chip is the ESP32-C3-WROOM-02U-N4, from the ESP32 family. Other key parts include the AMS1117-3.3, USBLC6-2P6 and TPS2116DRLR. By type, the board carries 18 resistors, 11 capacitors, 6 diodes, 4 ICs, 4 connectors and 4 relays.

It belongs with the iot & wireless designs in this gallery.

From the project

ESP32 ATX Power Controller

The purpose of this project is to control a computer remotely by connecting directly to the ATX motherboard power IO control. The control will be done with Home Assistant by using ESPHome firmware.

Custom software could be written by using ESP-IDF SDK but it is not the purpose of this project.

Double 2.54mm pin headers are set for each ATX functionalities to manage:

Esp atx power, from the project README
From the project README

Main components on the Esp atx power

ESP32-C3-WROOM-02U-N4AMS1117-3.3USBLC6-2P6TPS2116DRLR

Esp atx power bill of materials (BOM)

51 components, 28 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-C3-WROOM-02U-N4
ESP32-C3-WROOM-02U
Espressif Systems
U101
1
AMS1117-3.3
Advanced Monolithic Systems
U102
1
USBLC6-2P6
STMicroeletronics
U103
1
TPS2116DRLR
TPS2116DRL
Texas Instruments
U104
1
CONN_ARM_JTAG_SWD_10
Conn_ARM_JTAG_SWD_10
hanxia
J101
1
PZ254-2-09-W-8.5
Conn_02x09_Odd_Even
HCTL
J102
1
532610471
Conn_01x04
MOLEX
J103
1
GT-USB-7010ASV
G-Switch
J105
4
G3VM-61D1
Omron Electronics
K101, K102, K103, K104
2
TS-1187A-B-A-B
XKB Connectivity
SW101, SW102
2
TPD1E05U06DPYR
TPD1E05U06
Texas Instruments
D101, D102
1
NCD0805R1
Red
Foshan NationStar Optoelectronics
D103
1
KT-0805G
Green
Hubei KENTO Elec
D104
2
SMF5.0A
hongjiacheng
D105, D106
2
BLM18PG121SN1D
Ferrite Bead
Murata Electronics
L101, L102
3
CL05B104KO5NNNC
100n
Samsung Electro-Mechanics
C101, C105, C106
1
CL05A106MQ5NUNC
10u
Samsung Electro-Mechanics
C102
2
CC0603KRX7R9BB104
100n
YAGEO
C103, C110
2
TAJA106K016RNJ
10u
C104, C111
1
CL05A105KA5NQNC
1u
Samsung Electro-Mechanics
C107
Show 8 more
QtyPartRefs
2
~
C108, C109
4
0603WAF3900T5E
390
UNI-ROYAL(Uniroyal Elec)
R101, R102, R104, R106
5
0402WGF1002TCE
10k
UNI-ROYAL(Uniroyal Elec)
R103, R108, R109, R117, R118
2
0402WGF4701TCE
4.7k
UNI-ROYAL(Uniroyal Elec)
R105, R107
2
0402WGF5101TCE
5.1k
UNI-ROYAL(Uniroyal Elec)
R110, R111
2
0402WGF220JTCE
22
UNI-ROYAL(Uniroyal Elec)
R112, R113
2
0402WGF6800TCE
680
UNI-ROYAL(Uniroyal Elec)
R114, R115
1
0402WGF0000TCE
0
UNI-ROYAL(Uniroyal Elec)
R116

Esp atx power design files

The KiCad project lives in the valletw/esp-atx-power repository on GitHub; these links point at the commit this page was built from.

Esp atx power: common questions

What microcontroller does the Esp atx power use?

The Esp atx power is built around the ESP32-C3-WROOM-02U-N4, from the ESP32 family.

How big is the Esp atx power PCB?

The Esp atx power measures 76.6 × 25.1 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the Esp atx power?

51 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Esp atx power design files?

From the valletw/esp-atx-power repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Esp atx power design in my own project?

Yes, under the terms of its MIT license, which valletw chose for the repository.

Can I test firmware for the Esp atx power without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards