31 open source boards using the ESP32-C3-WROOM-02U-N4
Real designs built with the ESP32-C3-WROOM-02U-N4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esp atx power
valletw
76.6 × 25.1 mm51 parts4LMIT29ESP32
CloudSmoker
cwgstreet
70 × 70 mm56 parts4LMIT24ESP32
Integrated
hicancan
100 × 85 mm99 parts4LAGPL-3.01ESP32
Before backlabels
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before backlabels
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Integrated power baseline
hicancan
100 × 85 mm99 parts4LAGPL-3.01ESP32
Before import
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before import
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Projected negative
hicancan
100 × 85 mm99 parts4LAGPL-3.01ESP32
Before islands
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before islands
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before join
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before join
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Candidate lv
hicancan
72 × 68 mm33 parts2LAGPL-3.01ESP32
Before polarity
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before polarity
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Carbentra
hicancan
72 × 68 mm33 parts2LAGPL-3.01ESP32
Before pour
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before pour
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before rescue
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before rescue
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before rescue2
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before rescue2
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before silk
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before silk
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before stitch
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Before stitch
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Frugal iot v03
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Frugal iot v02
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Prerouted
mitra42
64 × 37 mm63 parts2LNo license0ESP32
Prerouted
mitra42
64 × 37 mm63 parts2LNo license0
How designs wire the ESP32-C3-WROOM-02U-N4
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-C3-WROOM-02U-N4 connects to, and the resistors, capacitors and other passives placed on it.
- The EN pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- The EN pin has a capacitor to GND on 5 of 5 designs, most often 1 µF (then 100 nF).
- The IO8 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ.
- The 3V3 pin is tied to 3.3V on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 3V3pin 1 | Connected to: 3.3V 100% | — |
| ENpin 2 | Connected to: A connector 40% |
|
| IO5pin 4 | Connected to: A connector 60% |
|
| IO6pin 5 | Connected to: A connector 80% |
|
| IO7pin 6 | Connected to: A connector 80% |
|
| IO8pin 7 | Connected to: A connector 40% |
|
| IO9pin 8 | Connected to: Signal 100% |
|
| GNDpin 9, 19 | Connected to: GND 100% | — |
| IO10pin 10 | Connected to: A connector 60%, SP3485EN-L/TR 40% |
|
| IO19pin 14 | Connected to: A connector 40% |
|
| IO2pin 16 | Connected to: A connector 60% |
|
| IO1pin 17 | Connected to: A connector 40% |
|
| IO0pin 18 | Connected to: A connector 40% |
|
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp atx power by valletw, CloudSmoker by cwgstreet, Candidate lv by hicancan and Before backlabels by mitra42.
The ESP32-C3-WROOM-02U-N4 in open source designs
The gallery holds 31 open source boards using the ESP32-C3-WROOM-02U-N4 from 5 GitHub repositories; a typical one measures about 64 × 37 mm and carries around 63 components.
84% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.
The most starred is Esp atx power by valletw.
Parts used alongside the ESP32-C3-WROOM-02U-N4
Microcontrollers on boards using the ESP32-C3-WROOM-02U-N4
What boards using the ESP32-C3-WROOM-02U-N4 are built for
ESP32-C3-WROOM-02U-N4: common questions
Where can I find a ESP32-C3-WROOM-02U-N4 reference design?
Each of the 31 boards on this page is a real design using the ESP32-C3-WROOM-02U-N4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the ESP32-C3-WROOM-02U-N4 EN pin?
The EN pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the ESP32-C3-WROOM-02U-N4.
What pull-up resistor is used on the ESP32-C3-WROOM-02U-N4 IO8 pin?
The IO8 pin has a pull-up to 3.3V on 5 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the ESP32-C3-WROOM-02U-N4.
How is the ESP32-C3-WROOM-02U-N4 3V3 pin connected?
The 3V3 pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-C3-WROOM-02U-N4.
What parts are used alongside the ESP32-C3-WROOM-02U-N4?
The ME6211C33M5G-N, SP3485EN-L/TR, TP4056 and XB5353A appear in the most repositories here.
Which microcontrollers do boards using the ESP32-C3-WROOM-02U-N4 use?
Most are built on ESP32 (31).
How big is a typical board using the ESP32-C3-WROOM-02U-N4?
The median is 64 × 37 mm, and 84% are two-layer designs.
What is the most popular open source board using the ESP32-C3-WROOM-02U-N4?
By GitHub stars, Esp atx power by valletw, with 29 stars.
Can I simulate one of these boards using the ESP32-C3-WROOM-02U-N4 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.