Lisko
vasya-zh·Lisko·kicad/Lisko_A1.kicad_pcb
About the Lisko PCB
Lisko is an open source Silicon Labs PCB design by vasya-zh, published on GitHub under the GPL-3.0 license. It is a 4-layer board measuring 55.8 × 17.8 mm, with 67 components from 30 distinct parts.
Its main chip is the EFM32PG23B200F512IM40, from the Silicon Labs family. Other key parts include the APS6404L-SQN-ZR, APS6404L-SQN-SN, STM32G431KBU6, W25Q32JVZP and W25Q32JVSNIQTR. By type, the board carries 24 capacitors, 14 resistors, 9 diodes, 8 ICs, 4 connectors and 3 crystals.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
micro EFM32PG23 devboard
Lisko is a EFM32PG23 devboard - micro version of the Gecko PG23 development board with NUCLEO-G431KB/Arduino-Nano-v3 pinout.
Lisko is breadboard and custom PCB ready, you can easily check your concept designs with EFM32 MCU
- EFM32PG23B200F512IM40 MCU with 512kB Flash, 64kB RAM, Secure Vault and almost all reroutable GPIOs - onboard SWD Flasher based on STM32 with edge USB-C connector - 32Mbit external Flash chip W25Q32JVSNIQ - 64Mbit external PSRAM chip APS6404L-SQN-SN - 24PIN E-INK connector with driver schematics, connected to EFM32PF23 MCU - External MCU 1.7-3.8V power input for…

Main components on the Lisko
Lisko bill of materials (BOM)
67 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | APS6404L-SQN-ZR | SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm | U1 |
| 1 | APS6404L-SQN-SN | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | EFM32PG23B200F512IM40 | QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm | U3 |
| 1 | STM32G431KBU6 STM32G431KBUx | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U7 |
| 1 | W25Q32JVZP | WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm | U8 |
| 1 | W25Q32JVSNIQTR W25Q32JVSNI | SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | ZD25WQ32CEIGR | DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm | U10 |
| 1 | XC6206P332MR | SOT-23 | U11 |
| 1 | SI1308EDL-T1-BE3 AO3400A | SOT-23 | Q4 |
| 1 | F32768K90NN60KC7 FC2012AN | Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | 390-10-37BCKM-TR 39MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | CSTNE20M0V530000R CSTNE20M | Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm | Y3 |
| 2 | Conn_01x15 | Connector_Castelled_15pin_2.54mm_withVIA | J1, J4 |
| 1 | FH34SRJ24S05SH50 FH34SRJ-24S-0.5SH | FH34SRJ-24S-0.5SH | J2 |
| 1 | USB_C_Receptacle | USB_C_PCB_receptacle_24pin_1mm-cutout | J5 |
| 1 | MF-FSMF050X-2 | Fuse_0603_1608Metric | F1 |
| 1 | SolderJumper_2_Bridged | SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm | JP3 |
| 1 | B3U-1000P-B B3U-1000P | SW_SPST_B3U-1000P-B | SW1 |
| 5 | BAT54WS | D_SOD-323F | D1, D6, D7, D8, D9 |
| 1 | IN-S42BT5G GREEN | LED_0402_1005Metric | D2 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN-S42BTR RED | LED_0402_1005Metric | D3 |
| 1 | APG1005SECT ORANGE | LED_0402_1005Metric | D4 |
| 1 | IN-S42BT5Y YELLOW | LED_0402_1005Metric | D5 |
| 1 | NR3015T100M | L_Wuerth_MAPI-3015 | L1 |
| 8 | CL05B104KB5NNWC 0.1uF 50V | C_0402_1005Metric | C1, C4, C5, C9, C17, C19, C20, C23 |
| 8 | GRM155R61H105KE5J 1uF 50V | C_0402_1005Metric | C3, C8, C10, C11, C14, C27, C30, C34 |
| 8 | GRT188R61E475KE3D 4.7uF 25V | C_0603_1608Metric | C12, C13, C18, C26, C29, C32, C33, C36 |
| 9 | CRCW0402-5.1K-E3 5.1K | R_0402_1005Metric | R1, R7, R16, R17, R18, R19, R22, R23 +1 |
| 4 | WR04X4700FTL 470 | R_0402_1005Metric | R8, R9, R10, R11 |
| 1 | RL0402FR-070R47L 0.47R | R_0603_1608Metric | R27 |
Lisko design files
The KiCad project lives in the vasya-zh/Lisko repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/Lisko_A1.kicad_pcb
- Schematickicad/Lisko_A1.kicad_sch
- BOMdocs/Lisko-A1-BOM.csv
Lisko: common questions
What microcontroller does the Lisko use?
The Lisko is built around the EFM32PG23B200F512IM40, from the Silicon Labs family.
How big is the Lisko PCB?
The Lisko measures 55.8 × 17.8 mm, has 4 copper layers and is 0.8 mm thick.
How many components are on the Lisko?
67 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Lisko design files?
From the vasya-zh/Lisko repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Lisko design in my own project?
Yes, under the terms of its GPL-3.0 license, which vasya-zh chose for the repository.
Can I test firmware for the Lisko without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Silicon Labs firmware against it before you order a PCB.
Similar boards
Silicon Labs
Tomu hardware
im-tomu
13 × 9.4 mm11 parts2LCC-BY-SA-4.0365Silicon Labs
One key
ahtn
14.5 × 14.5 mm10 parts2LNo license96Silicon Labs
2key
ahtn
36.5 × 17.5 mm7 parts2LNo license96Silicon Labs
Ble soil moisture sensor
Miceuz
170 × 18 mm33 parts2LApache-2.033Silicon Labs
Ble soil moisture sensor pannel
Miceuz
170 × 36 mm29 parts2LApache-2.033Silicon Labs
Main
andete
71.9 × 39.3 mm91 parts2LNo license25