7 open source boards using the STM32G431KBU6

Real designs built with the STM32G431KBU6, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the STM32G431KBU6

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the STM32G431KBU6 connects to, and the resistors, capacitors and other passives placed on it.

  • The PG10-NRST pin has a capacitor to GND on 5 of 6 designs, most often 100 nF.
  • The VDDA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
  • The VDD_2 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF).
  • The PB8-BOOT0 pin has a resistor to GND on 5 of 6 designs, most often 10 kΩ (then 5.1 kΩ).
VDD_1pin 1Connected to: 3.3V 100%
  • Decoupling capacitor on 67% · 100 nF (7), 10 µF (2)
PG10-NRSTpin 4Connected to: A connector 83%
  • Capacitor to GND on 83% · 100 nF (5)
  • Pull-up to 3.3V on 67% · 10 kΩ (3), 5.1 kΩ (1)
PA0pin 5Connected to: A connector 50%, QPA9501TR13 33% · not connected 17%
  • Resistor to GND on 50% · 27.4 kΩ (2), 10 kΩ (1)
  • Series resistor on 33% · 0 Ω (2)
  • Capacitor to GND on 33% · 220 pF (2)
PA1pin 6Connected to: Signal 100%
  • Series resistor on 50% · 5.1 kΩ (1)
  • Resistor to GND on 33% · 100 kΩ (1), 5.1 kΩ (1)
PA2pin 7Connected to: Signal 83% · not connected 17%
  • Series capacitor on 33% · 100 nF (2)
PA3pin 8Connected to: Signal 83% · not connected 17%
  • Series resistor on 33%
  • Capacitor to GND on 33% · 560 pF (2)
PA4pin 9Connected to: Signal 83% · not connected 17%
  • Series resistor on 50% · 100 kΩ (1)
PA5pin 10Connected to: The microcontroller 33%
  • Series resistor on 33% · 0 Ω (2)
PA6pin 11Connected to: The microcontroller 33%
  • Series resistor on 33% · 0 Ω (2)
PA7pin 12Connected to: A connector 50%, the microcontroller 33%
  • Resistor to GND on 33%
VSSApin 14Connected to: GND 100%
VDDApin 15Connected to: 3.3V 67% · a signal 33%
  • Decoupling capacitor on 83% · 100 nF (9), 1 µF (3)
  • Inductor on 33%
VSS_1pin 16Connected to: GND 100%
VDD_2pin 17Connected to: 3.3V 100%
  • Decoupling capacitor on 83% · 100 nF (7), 1 µF (1)
PA11pin 21Connected to: A connector 50% · not connected 17%
  • Series resistor on 33% · 100 Ω (2)
PA13pin 23Connected to: A connector 50% · not connected 17%
  • Series resistor on 33% · 22 Ω (2)
PA14pin 24Connected to: A connector 50% · not connected 17%
  • Series resistor on 33% · 22 Ω (2)
PB3pin 26Connected to: A connector 33% · not connected 17%
  • Series resistor on 33% · 22 Ω (2)
PB8-BOOT0pin 31Connected to: A connector 33%
  • Resistor to GND on 83% · 10 kΩ (4), 5.1 kΩ (1)
VSS_2pin 32Connected to: GND 100%
EPpin 33Connected to: GND 100%

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include URC by spikonado, Emb drone flight stack by CGainsWorks, OpenSourceDrone by CGainsWorks and Knuckle by HeyPCB.

The STM32G431KBU6 in open source designs

The gallery holds 7 open source boards using the STM32G431KBU6 from 6 GitHub repositories; a typical one measures about 55.8 × 35 mm and carries around 67 components.

100% use four copper layers or more, and 71% carry an open source license.

The most starred is URC by spikonado.

Microcontrollers on boards using the STM32G431KBU6

STM32G431KBU6: common questions

Where can I find a STM32G431KBU6 reference design?

Each of the 7 boards on this page is a real design using the STM32G431KBU6. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the STM32G431KBU6 PG10-NRST pin connected?

The PG10-NRST pin has a capacitor to GND on 5 of 6 designs, most often 100 nF. Counted from the KiCad layouts of 6 open source designs using the STM32G431KBU6.

What decoupling capacitors do designs use on the STM32G431KBU6 VDDA pin?

The VDDA pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32G431KBU6.

What decoupling capacitors do designs use on the STM32G431KBU6 VDD_2 pin?

The VDD_2 pin has a decoupling capacitor on 5 of 6 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the STM32G431KBU6.

What parts are used alongside the STM32G431KBU6?

The ADPL40502AUJZ-1.2-R7, AT7456E, ATMEGA4809-AF, BMP390 and ESP32-C3-MINI-1-H4X appear in the most repositories here.

Which microcontrollers do boards using the STM32G431KBU6 use?

Most are built on ESP32 (3), STM32 (3) and Silicon Labs (1).

How big is a typical board using the STM32G431KBU6?

The median is 55.8 × 35 mm, and 0% are two-layer designs.

What is the most popular open source board using the STM32G431KBU6?

By GitHub stars, URC by spikonado, with 2 stars.

Can I simulate one of these boards using the STM32G431KBU6 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part