Mcxc244-usb

via·viaems-boards·mcxc244-usb/mcxc244-usb.kicad_pcb

Mcxc244-usb PCB layout, top view — open source NXP board by via

About the Mcxc244-usb PCB

Mcxc244-usb is an open source NXP PCB design by via, published on GitHub. It is a 2-layer board measuring 34 × 78 mm, with 28 components from 17 distinct parts.

Its main chip is the LM2940, from the NXP family. Other key parts include the TC442XA. By type, the board carries 12 connectors, 9 capacitors, 4 resistors and 3 ICs.

It belongs with the sensors designs in this gallery.

From the project

ViaEMS PCB Designs

In order of creation... ## Analog V1 - Analog/ADC Core board based on a DIP TLC2543 - All throughhole - Dedicated 5V supply - 4 Thermistor inputs - Inputs for EGO, BRV, MAP, TPS - 5 Spares

Do not use because: - 3v supply for CAN doesn't work at all - the FETs without gate drivers has poor performance from a 3.3 V microcontroller - No VR inputs

Shouldn't be used anymore, but really only because the outputs chosen for test trigger vs real triggers are different in firmware. The board can be used again with some minor tweaks (and I have used this board for years)

Mcxc244-usb, from the project README
From the project README

Main components on the Mcxc244-usb

LM2940TC442XA

Mcxc244-usb bill of materials (BOM)

28 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
LM2940
MCXC244VFM
U1
2
TC442XA
SN74LVC2T45DCUR
U2, U3
1
CONN_02X08_COUNTER_CLOCKWISE
USB_C_Receptacle_USB2.0_14P
J1
1
CONN_01X02
Conn_ARM_JTAG_SWD_10
J2
1
CONN_01X03
Conn_01x06
J3
1
CONN_01X04
Conn_01x04
J4
2
CONN_01X02
DIR
J5, J6
3
CONN_01X04
Conn_01x06
J7, J8, J10
1
CONN_01X08
Conn_01x06
J9
1
CONN_01X08
Vbus
J11
1
CONN_01X02
Vcc
J12
4
C
C1, C2, C3, C4
1
1UF
2.2 uF
C5
2
1UF
10 uF
C6, C9
2
1UF
0.1 uF
C7, C8
2
100K
33
R1, R2
2
100K
5.1k
R3, R4

Mcxc244-usb design files

The KiCad project lives in the via/viaems-boards repository on GitHub; these links point at the commit this page was built from.

Mcxc244-usb: common questions

What microcontroller does the Mcxc244-usb use?

The Mcxc244-usb is built around the LM2940, from the NXP family.

How big is the Mcxc244-usb PCB?

The Mcxc244-usb measures 34 × 78 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Mcxc244-usb?

28 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Mcxc244-usb design files?

From the via/viaems-boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Mcxc244-usb design in my own project?

The repository has no license, so all rights stay with via. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Mcxc244-usb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in viaems-boards

Similar boards