Proto stm32f427

via·viaems-boards·proto-stm32f427/proto-stm32f427.kicad_pcb

Proto stm32f427 PCB layout, top view — open source STM32 board by via

About the Proto stm32f427 PCB

Proto stm32f427 is an open source STM32 PCB design by via, published on GitHub. It is a 2-layer board measuring 34 × 78 mm, with 46 components from 30 distinct parts.

Its main chip is the STM32F427VGTX, from the STM32 family. Other key parts include the NCV5501 and W25Q32JVSS. By type, the board carries 19 capacitors, 10 connectors, 10 resistors, 3 ICs, 3 diodes and 1 crystal.

It belongs with the sensors designs in this gallery.

From the project

ViaEMS PCB Designs

In order of creation... ## Analog V1 - Analog/ADC Core board based on a DIP TLC2543 - All throughhole - Dedicated 5V supply - 4 Thermistor inputs - Inputs for EGO, BRV, MAP, TPS - 5 Spares

Do not use because: - 3v supply for CAN doesn't work at all - the FETs without gate drivers has poor performance from a 3.3 V microcontroller - No VR inputs

Shouldn't be used anymore, but really only because the outputs chosen for test trigger vs real triggers are different in firmware. The board can be used again with some minor tweaks (and I have used this board for years)

Proto stm32f427, from the project README
From the project README

Main components on the Proto stm32f427

NCV5501STM32F427VGTXW25Q32JVSS

Proto stm32f427 bill of materials (BOM)

46 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NCV5501
U1
1
STM32F427VGTX
STM32F427VGTx
U2
1
W25Q32JVSS
U3
1
8 MHz
Y1
5
Conn_02x08_Odd_Even
J1, J2, J3, J4, J7
1
PWR_5v
J5
1
PWR_3v
J6
1
USB_C_Receptacle_USB2.0
J8
1
Conn_ARM_ETM_SWD_20
J9
1
BOOT
J10
1
BAT48JFILM
LED
D1
1
LED
D2
1
BAT48JFILM
D3
1
10 uF
C1
1
47 uF
C2
2
2.2 uF
C3, C5
2
16 pF
C4, C6
2
1 uF
C7, C17
9
0.1 uF
C8, C10, C11, C12, C13, C14, C15, C16 +1
1
4.7 uF
C9
Show 10 more
QtyPartRefs
1
0.1 uF
C19
1
220
R1
1
100K
220
R2
1
220
1k
R3
1
4.7K
100k
R4
1
10K
220
R5
1
220
5.1k
R6
1
220
4.7k
R7
1
5.1k
R8
2
10k
R9, R10

Proto stm32f427 design files

The KiCad project lives in the via/viaems-boards repository on GitHub; these links point at the commit this page was built from.

Proto stm32f427: common questions

What microcontroller does the Proto stm32f427 use?

The Proto stm32f427 is built around the STM32F427VGTX, from the STM32 family.

How big is the Proto stm32f427 PCB?

The Proto stm32f427 measures 34 × 78 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Proto stm32f427?

46 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Proto stm32f427 design files?

From the via/viaems-boards repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Proto stm32f427 design in my own project?

The repository has no license, so all rights stay with via. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Proto stm32f427 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in viaems-boards

Similar boards