Viaems
via·viaems-boards·viaems-v1/viaems.kicad_pcb
About the Viaems PCB
Viaems is an open source STM32 PCB design by via, published on GitHub. It is a 2-layer board measuring 136 × 64 mm, with 208 components from 55 distinct parts.
Its main chip is the STM32F407VGTX, from the STM32 family. Other key parts include the LM2940, TC442XA, MCP2562-H-SN, NCP1117-3.3_TO252 and MPXH6400A. By type, the board carries 86 resistors, 61 capacitors, 21 connectors, 16 ICs, 12 diodes and 8 transistors.
It belongs with the sensors designs in this gallery.
From the project
ViaEMS PCB Designs
In order of creation... ## Analog V1 - Analog/ADC Core board based on a DIP TLC2543 - All throughhole - Dedicated 5V supply - 4 Thermistor inputs - Inputs for EGO, BRV, MAP, TPS - 5 Spares
Do not use because: - 3v supply for CAN doesn't work at all - the FETs without gate drivers has poor performance from a 3.3 V microcontroller - No VR inputs
Shouldn't be used anymore, but really only because the outputs chosen for test trigger vs real triggers are different in firmware. The board can be used again with some minor tweaks (and I have used this board for years)

Main components on the Viaems
Viaems bill of materials (BOM)
208 components, 55 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | LM2940 | TO-220-3_Horizontal_TabDown | U1, U15 |
| 7 | TC442XA TC442xA | SOIC-8_3.9x4.9mm_P1.27mm | U2, U3, U4, U5, U6, U7, U8 |
| 1 | STM32F407VGTX STM32F407VGTx | LQFP-100_14x14mm_P0.5mm | U9 |
| 1 | MCP2562-H-SN | SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | NCP1117-3.3_TO252 | TO-252-2 | U11 |
| 1 | MPXH6400A | Freescale_98ARH99089A | U12 |
| 1 | MPXH6115AC6U | Freescale_98ARH99089A | U13 |
| 1 | MAX9926UAEE+ | QSOP-16_3.9x4.9mm_P0.635mm | U14 |
| 1 | AD7888 | SOIC-16_3.9x9.9mm_P1.27mm | U16 |
| 8 | VND7NV04 | TO-252-2 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | 8 Mhz | Crystal_HC49-U_Vertical | Y1 |
| 1 | CONN_02X08_COUNTER_CLOCKWISE Conn_02x08_Counter_Clockwise | PinHeader_2x08_P2.54mm_Vertical | J1 |
| 5 | CONN_01X02 Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2, J5, J6, J12, J21 |
| 1 | CONN_01X03 Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 5 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J4, J7, J8, J10, J17 |
| 2 | CONN_01X08 Conn_01x08 | PinHeader_1x08_P2.54mm_Vertical | J9, J11 |
| 2 | CONN_01X06 Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J13, J14 |
| 1 | CONN_02X06_ODD_EVEN Conn_02x06_Odd_Even | PinHeader_2x06_P2.54mm_Vertical | J15 |
| 1 | CONN_01X02 VBAT | PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | USB_B_Micro | USB_Micro-B_Amphenol_10103594-0001LF_Horizontal | J18 |
Show 35 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CONN_ARM_JTAG_SWD_10 Conn_ARM_JTAG_SWD_10 | PinHeader_2x05_P1.27mm_Vertical_SMD | J19 |
| 1 | CONN_01X06 SPI | PinHeader_1x06_P2.54mm_Vertical | J20 |
| 2 | Jumper | PinHeader_1x02_P2.54mm_Vertical | JP1, JP3 |
| 1 | Jumper_NC_Dual | PinHeader_1x03_P2.54mm_Vertical | JP2 |
| 1 | D | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | ZEN056V115A24LS | Littelfuse_PolyZen-LS | D2 |
| 8 | BAT54S | SOT-23_Handsoldering | D3, D5, D6, D7, D8, D10, D11, D12 |
| 1 | 4.7 V | D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4 |
| 1 | 4.7 V | D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D9 |
| 2 | 10 uF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1, C53 |
| 24 | 0.1 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2, C3, C15, C18, C19, C20, C21, C22 +16 |
| 3 | 47 uF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C4, C30, C59 |
| 7 | 1UF 1uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C5, C6, C7, C8, C9, C10, C62 |
| 2 | 16 pF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C11, C13 |
| 2 | 2.2 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C12, C14 |
| 3 | 1 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C16, C26, C57 |
| 1 | 4.7 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C17 |
| 2 | 10 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C29, C60 |
| 6 | 0.47 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C34, C35, C36, C41, C42, C47 |
| 3 | 0.01 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C38, C46, C54 |
| 2 | 0.33 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C39, C48 |
| 2 | 0.22 uF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C44, C50 |
| 2 | 1 nF | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C51, C52 |
| 21 | 100K 100k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R2, R3, R4, R11, R12, R13, R14 +13 |
| 30 | 1k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6, R7, R8, R9, R10, R21, R22 +22 |
| 4 | 150 | R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R17, R18, R19, R20 |
| 8 | 150 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R37, R38, R39, R40, R41, R42, R43, R44 |
| 7 | 220 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R47, R80, R81, R82, R83, R84, R85 |
| 1 | 120 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R50 |
| 2 | 22 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R51, R52 |
| 1 | 3.9K 3.9k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R54 |
| 6 | 470 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R57, R58, R59, R63, R65, R72 |
| 2 | 2.4K 2.4k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R61, R69 |
| 2 | 10K 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R70, R71 |
| 2 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R78, R79 |
Viaems design files
The KiCad project lives in the via/viaems-boards repository on GitHub; these links point at the commit this page was built from.
Viaems: common questions
What microcontroller does the Viaems use?
The Viaems is built around the STM32F407VGTX, from the STM32 family.
How big is the Viaems PCB?
The Viaems measures 136 × 64 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Viaems?
208 components, from 55 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Viaems design files?
From the via/viaems-boards repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Viaems design in my own project?
The repository has no license, so all rights stay with via. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Viaems without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in viaems-boards
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k