Io
via·viaems-boards·io-v2/io.kicad_pcb
About the Io PCB
Io is an open source PCB design by via, published on GitHub. It is a 2-layer board measuring 145.5 × 51 mm, with 90 components from 43 distinct parts.
Other key parts include the LM2940, TC442XA, MPXH6400A and MPXH6115AC6U. By type, the board carries 50 resistors, 13 connectors, 12 capacitors, 8 transistors, 5 ICs and 2 diodes.
It belongs with the sensors designs in this gallery.
From the project
ViaEMS PCB Designs
In order of creation... ## Analog V1 - Analog/ADC Core board based on a DIP TLC2543 - All throughhole - Dedicated 5V supply - 4 Thermistor inputs - Inputs for EGO, BRV, MAP, TPS - 5 Spares
Do not use because: - 3v supply for CAN doesn't work at all - the FETs without gate drivers has poor performance from a 3.3 V microcontroller - No VR inputs
Shouldn't be used anymore, but really only because the outputs chosen for test trigger vs real triggers are different in firmware. The board can be used again with some minor tweaks (and I have used this board for years)

Main components on the Io
Io bill of materials (BOM)
90 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2940 | TO-220-3_Horizontal_TabDown | U1 |
| 1 | TC442XA MIC4469 | SOIC-16W_7.5x10.3mm_P1.27mm | U2 |
| 1 | TC442XA MAX9926UAEE+ | QSOP-16_3.9x4.9mm_P0.635mm | U3 |
| 1 | MPXH6400A MIC4469 | SOIC-16W_7.5x10.3mm_P1.27mm | U12 |
| 1 | MPXH6115AC6U MIC4469 | SOIC-16W_7.5x10.3mm_P1.27mm | U13 |
| 8 | VND7NV04 MOSFET | TO-252-2 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | OUT_GND | PinHeader_1x04_P2.54mm_Horizontal | P1 |
| 1 | TRIG-cpu | PinHeader_1x04_P2.54mm_Horizontal | P2 |
| 1 | DIG-CPU | PinHeader_1x04_P2.54mm_Horizontal | P3 |
| 1 | IN-CPU | PinHeader_1x04_P2.54mm_Horizontal | P4 |
| 1 | CPU_PWR | PinHeader_1x04_P2.54mm_Horizontal | P5 |
| 1 | TRIG-IN | PinHeader_1x04_P2.54mm_Horizontal | P6 |
| 1 | DIG-IN | PinHeader_1x04_P2.54mm_Horizontal | P7 |
| 1 | IGNITION | PinHeader_1x04_P2.54mm_Horizontal | P8 |
| 1 | PWR_IN | PinHeader_1x04_P2.54mm_Horizontal | P9 |
| 1 | INJ-CPU | PinHeader_1x04_P2.54mm_Horizontal | P10 |
| 1 | INJECTORS | PinHeader_1x04_P2.54mm_Horizontal | P11 |
| 1 | LSD-CPU | PinHeader_1x04_P2.54mm_Horizontal | P12 |
| 1 | LSDS | PinHeader_1x04_P2.54mm_Horizontal | P13 |
| 1 | BAT54S | SOT-23 | D1 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ZEN056V115A24LS BAT54S | SOT-23 | D2 |
| 1 | 10 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 0.1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 1 | 47 uF | C_1206_3216Metric | C4 |
| 1 | 1UF 1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5 |
| 2 | 1UF 1n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C7 |
| 1 | 1UF 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 1UF 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14 |
| 2 | 1 uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C20 |
| 8 | 100K 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R12, R35, R36, R49 |
| 6 | 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R8, R21, R22, R23, R24 |
| 9 | 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R9, R45, R48, R51, R52, R53, R55 +1 |
| 2 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R10 |
| 2 | 100K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R46 |
| 4 | 100K 150 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R13, R14, R15, R16 |
| 5 | 150 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R17, R41, R42, R43, R44 |
| 7 | 150 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R18, R19, R20, R37, R38, R39, R40 |
| 2 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R25, R26 |
| 1 | 220 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R47 |
| 1 | 120 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R50 |
| 1 | 3.9K 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R54 |
| 2 | 470 100k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R57, R58 |
Io design files
The KiCad project lives in the via/viaems-boards repository on GitHub; these links point at the commit this page was built from.
Io: common questions
How big is the Io PCB?
The Io measures 145.5 × 51 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Io?
90 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Io design files?
From the via/viaems-boards repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Io design in my own project?
The repository has no license, so all rights stay with via. Use it as a reference, and ask the author before reusing the design.
More boards in viaems-boards
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956