ErgoV
vibsthebot·ergoV·src/left/ergoV.kicad_pcb
About the ErgoV PCB
ErgoV is an open source Nordic nRF PCB design by vibsthebot, published on GitHub. It is a 2-layer board measuring 133.4 × 86.2 mm, with 63 components from 17 distinct parts.
Its main chip is the MDBT50Q-1MV2, from the Nordic nRF family. Other key parts include the MCP73831-2-OT and USBLC6-2SC6. By type, the board carries 23 diodes, 21 switches, 7 resistors, 6 capacitors, 3 ICs and 1 transistor.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
A custom ergonomic split keyboard powered by a nrf52840 and PG1316S switches. At under 8 millimeters thick, this keyboard is extremly thin and portable.

Main components on the ErgoV
ErgoV bill of materials (BOM)
63 components, 17 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MDBT50Q-1MV2 | Raytac_MDBT50Q | U1 |
| 1 | MCP73831-2-OT | SOT-23-5 | U2 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | AO3401A | SOT-23 | Q1 |
| 1 | USB_C_RECEPTACLE_USB2.0_16P USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
| 1 | C265016 Battery | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | BT1 |
| 21 | SW_PUSH_3PIN_GND SW_Push_3pin_GND | CPG1316S01D02_kailhspecsheet_mikefive | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +13 |
| 21 | C81598 D | Diode_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8 +13 |
| 1 | MBR0540 | D_SOD-123 | D28 |
| 1 | C434437 Orange | LED_0805_2012Metric | D29 |
| 2 | 4.7UF 4.7uF | C_0603_1608Metric | C1, C22 |
| 4 | 10UF 10uF | C_0603_1608Metric | C2, C3, C4, C11 |
| 2 | 27 | R_0402_1005Metric | R1, R2 |
| 2 | 5K1 5k1 | R_0603_1608Metric | R3, R4 |
| 1 | 10K 10k | R_0603_1608Metric | R7 |
| 1 | 2k | R_0603_1608Metric | R11 |
| 1 | 0.47K 0.47k | R_0603_1608Metric | R12 |
ErgoV design files
The KiCad project lives in the vibsthebot/ergoV repository on GitHub; these links point at the commit this page was built from.
ErgoV: common questions
What microcontroller does the ErgoV use?
The ErgoV is built around the MDBT50Q-1MV2, from the Nordic nRF family.
How big is the ErgoV PCB?
The ErgoV measures 133.4 × 86.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the ErgoV?
63 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ErgoV design files?
From the vibsthebot/ergoV repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ErgoV design in my own project?
The repository has no license, so all rights stay with vibsthebot. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the ErgoV without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in ergoV
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381