Wio-SX1262 for ESP32S3

Videocraft10·PetPad·KiCad Files/OPL_Kicad_Library-master/Seeed Studio Wio SX1262 for XIAO ESP32S3/Wio-SX1262 for ESP32S3.kicad_pcb

Wio-SX1262 for ESP32S3 PCB layout, top view — open source board by Videocraft10

About the Wio-SX1262 for ESP32S3 PCB

Wio-SX1262 for ESP32S3 is an open source PCB design by Videocraft10, published on GitHub under the MIT license. It is a 2-layer board measuring 17.8 × 21.4 mm, with 15 components from 10 distinct parts.

Other key parts include the Wio-SX1262. By type, the board carries 7 resistors, 3 connectors, 1 IC, 1 relay, 1 test point and 1 diode.

It belongs with the rf & radio designs in this gallery.

From the project

Custom Made Tamagotchi Like Device

Visible stats that change over time with visual feedback on overall pets health

First download the PCB Gerber file from here then send it to your preferred manufacturer! Next buy all of the components from the BOM. For screws and similar items, it is recommended to find the cheapest in your location. Next 3D print the case from here here and ensure the PCB fits once it arrives. Next solder on all of the components and screw the PCB into the case! Finally flash the firmware onto it from here (you might have to build the file on you own computer)

Wio-SX1262 for ESP32S3, from the project README — From the project README

Main components on the Wio-SX1262 for ESP32S3

Wio-SX1262 for ESP32S3 bill of materials (BOM)

15 components, 10 distinct parts.

Qty	Part	Footprint	Refs
1	Wio-SX1262 SenseCAP	MODULE12P-1.27-11X11.6MM	U1
2	Header 1x7 2.54mm	H7-2.54	J1, J2
1	BTB SCOKET P0.40 30pin LXWCONN E	BTB2X15-FEMALE-8.6X2.94X3.9MM	J3
1	TS-1185E 百斯特	BUTTON2P_3_9X3X2MM	K1
1	Test Point	TP-D3_5c2_2mm	TP1
1	19-217/G7C-AN1P2/3T Green Everlight	LED-0603	D1
1	CC0402KRX7R7BB104 100nF YAGEO	C0402	C1
2	RC0402JR-0710KL 10K YAGEO	R0402	R1, R3
1	RC0402FR-07330RL 330R YAGEO	R0402	R2
4	RC0201FR-0745RL 47R YAGEO	R0402	R4, R5, R6, R7

Wio-SX1262 for ESP32S3 design files

The KiCad project lives in the Videocraft10/PetPad repository on GitHub; these links point at the commit this page was built from.

Wio-SX1262 for ESP32S3: common questions

How big is the Wio-SX1262 for ESP32S3 PCB?

The Wio-SX1262 for ESP32S3 measures 17.8 × 21.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Wio-SX1262 for ESP32S3?

15 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Wio-SX1262 for ESP32S3 design files?

From the Videocraft10/PetPad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Wio-SX1262 for ESP32S3 design in my own project?

Yes, under the terms of its MIT license, which Videocraft10 chose for the repository.

More boards in PetPad

Similar boards