HardLabs

ESP32S3

Videocraft10·PetPad·KiCad Files/OPL_Kicad_Library-master/Seeed Studio XIAO ESP32S3/ESP32S3.kicad_pcb

ESP32S3 PCB layout, top view — open source ESP32 board by Videocraft10
Simulate this board

About the ESP32S3 PCB

ESP32S3 is an open source ESP32 PCB design by Videocraft10, published on GitHub under the MIT license. It is a 2-layer board measuring 17.8 × 21.1 mm, with 71 components from 38 distinct parts.

Its main chip is the LP0404N3T5G, from the ESP32 family. Other key parts include the ESP32-S3R8, SGM6029CYG/TR, SGM40567-4.2XG/TR and GD25Q64ENIGR. By type, the board carries 28 capacitors, 13 resistors, 8 test points, 4 ICs, 4 inductors and 3 connectors.

From the project

Custom Made Tamagotchi Like Device

Visible stats that change over time with visual feedback on overall pets health

First download the PCB Gerber file from here then send it to your preferred manufacturer! Next buy all of the components from the BOM. For screws and similar items, it is recommended to find the cheapest in your location. Next 3D print the case from here here and ensure the PCB fits once it arrives. Next solder on all of the components and screw the PCB into the case! Finally flash the firmware onto it from here (you might have to build the file on you own computer)

ESP32S3, from the project README
From the project README

Main components on the ESP32S3

ESP32-S3R8SGM6029CYG/TRSGM40567-4.2XG/TRGD25Q64ENIGR

ESP32S3 bill of materials (BOM)

71 components, 38 distinct parts.

QtyPartRefs
1
ESP32-S3R8
U1
1
SGM6029CYG/TR
U3
1
SGM40567-4.2XG/TR
U4
1
GD25Q64ENIGR
U5
1
LP0404N3T5G
Q1
1
40MHz/306011364
X1
2
DNP
J1, J2
1
DF40C-30DP-0.4V(51)
J3
1
U.FL-R-SMT-1
ANT1
1
VBAT
BAT0
1
GND
GND0
2
SKTAAAE010/311021459
K1, K2
8
—
TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8
1
UBF31-0171
USB0
1
RED
CHG0
1
LMBR4010BST5G
D2
1
Yellow
D3
1
2nH
L1
1
3.3nH
L2
1
DNP
L3
Show 18 more
QtyPartRefs
1
470nH
L4
4
DNP
C1, C2, C17, C20
4
2.2uF
C3, C9, C13, C16
3
4.7uF
C4, C5, C6
3
10pF
C7, C8, C28
4
1uF
C10, C21, C25, C26
8
100nF
C11, C14, C15, C19, C22, C23, C29, C30
1
10nF
C12
1
1pF
C18
2
5.1K
R1, R2
2
22R
R3, R4
1
0R
R5
1
499R
R6
3
10K
R7, R8, R11
1
100K
R9
1
220K
R10
1
249K
R13
1
1.5K
R15

ESP32S3 design files

The KiCad project lives in the Videocraft10/PetPad repository on GitHub; these links point at the commit this page was built from.

ESP32S3: common questions

What microcontroller does the ESP32S3 use?

The ESP32S3 is built around the LP0404N3T5G, from the ESP32 family.

How big is the ESP32S3 PCB?

The ESP32S3 measures 17.8 × 21.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32S3?

71 components, from 38 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32S3 design files?

From the Videocraft10/PetPad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32S3 design in my own project?

Yes, under the terms of its MIT license, which Videocraft10 chose for the repository.

Can I test firmware for the ESP32S3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PetPad

Similar boards