HardLabs

Videocraft PetPad

Videocraft10·PetPad·KiCad Files/Videocraft PetPad.kicad_pcb

Videocraft PetPad PCB layout, top view — open source ESP32 board by Videocraft10

About the Videocraft PetPad PCB

Videocraft PetPad is an open source ESP32 PCB design by Videocraft10, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 75 mm, with 8 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C6-DIP, from the ESP32 family. Other key parts include the HS96L03W2C03. By type, the board carries 3 switches, 2 ICs and 2 connectors.

From the project

Custom Made Tamagotchi Like Device

Visible stats that change over time with visual feedback on overall pets health

First download the PCB Gerber file from here then send it to your preferred manufacturer! Next buy all of the components from the BOM. For screws and similar items, it is recommended to find the cheapest in your location. Next 3D print the case from here here and ensure the PCB fits once it arrives. Next solder on all of the components and screw the PCB into the case! Finally flash the firmware onto it from here (you might have to build the file on you own computer)

Videocraft PetPad, from the project README
From the project README

Main components on the Videocraft PetPad

XIAO-ESP32-C6-DIPHS96L03W2C03

Videocraft PetPad bill of materials (BOM)

8 components, 6 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C6-DIP
U1
1
HS96L03W2C03
HS(汉昇)
U2
1
Conn_01x02
J1
1
Conn_01x02
J2
1
1207-P6.5MM
XHXDZ(兴华鑫)
BUZZER1
3
SW_Push
SW1, SW2, SW3

Videocraft PetPad design files

The KiCad project lives in the Videocraft10/PetPad repository on GitHub; these links point at the commit this page was built from.

Videocraft PetPad: common questions

What microcontroller does the Videocraft PetPad use?

The Videocraft PetPad is built around the XIAO-ESP32-C6-DIP, from the ESP32 family.

How big is the Videocraft PetPad PCB?

The Videocraft PetPad measures 50 × 75 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Videocraft PetPad?

8 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Videocraft PetPad design files?

From the Videocraft10/PetPad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Videocraft PetPad design in my own project?

Yes, under the terms of its MIT license, which Videocraft10 chose for the repository.

Can I test firmware for the Videocraft PetPad without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in PetPad

Similar boards