HardLabs

ECG Project

Vike-n·ECG_Project·KiCAD/Electrocardiograma.kicad_pcb

ECG Project PCB layout, top view — open source ESP32 board by Vike-n

About the ECG Project PCB

ECG Project is an open source ESP32 PCB design by Vike-n, published on GitHub. It is a 2-layer board measuring 56.5 × 47.2 mm, with 78 components from 36 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the INA823DT, TLV1117-33, TLV4888, TLV1117-ADJ and SC6038. By type, the board carries 40 resistors, 17 capacitors, 8 ICs, 6 connectors, 6 diodes and 1 switch.

It belongs with the iot & wireless designs in this gallery.

From the project

KiCAD archives for ECG proyect

This repository contains the hardware design, schematics, and simulation files for an electrocardiogram (ECG) signal acquisition and conditioning system developed for academic purposes.

The system is focused on capturing bio-physiological signals, featuring instrumentation amplification, filtering, and digital processing of the signals. This project also covers the power supply and basic protections of the system.

Main components on the ECG Project

INA823DTESP32-C3-WROOM-02TLV1117-33TLV4888TLV1117-ADJSC6038CH224K

ECG Project bill of materials (BOM)

78 components, 36 distinct parts.

QtyPartRefs
1
INA823DT
U1
1
ESP32-C3-WROOM-02
U2
1
TLV1117-33
U3
2
TLV4888
U4, U5
1
TLV1117-ADJ
U6
1
SC6038
U7
1
CH224K
U8
1
54-00174
J1
1
Conn_01x02_Pin
J2
1
USB_C_Receptacle_PowerOnly_6P
J3
2
Conn_01x02_Pin
J4, J5
1
Conn_01x04_Pin
J6
1
SLW-129956-4A-RA-N-D
S1
1
D_TVS_Dual_AAC
D1
1
1N4007
D2
1
BAT54S
D3
2
LED
D4, D6
1
SS24
D5
9
10uF
C1, C2, C7, C9, C10, C14, C15, C16 +1
6
100n
C3, C4, C5, C6, C8, C13
Show 16 more
QtyPartRefs
2
10n
C11, C12
2
510
R1, R2
3
330k
R4, R5, R25
4
31K6
R6, R7, R8, R9
2
22K
R10, R35
4
33K
R11, R14, R15, R24
10
100K
R12, R16, R18, R19, R20, R22, R23, R34 +2
2
27K
R17, R21
5
10K
R28, R29, R30, R39, R44
1
120
R31
2
470
R32, R42
1
47
R33
1
300K
R37
1
18K
R40
1
0.3
R41
1
24k
R43

ECG Project design files

The KiCad project lives in the Vike-n/ECG_Project repository on GitHub; these links point at the commit this page was built from.

ECG Project: common questions

What microcontroller does the ECG Project use?

The ECG Project is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the ECG Project PCB?

The ECG Project measures 56.5 × 47.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ECG Project?

78 components, from 36 distinct parts. The full bill of materials is listed on this page.

Where can I download the ECG Project design files?

From the Vike-n/ECG_Project repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ECG Project design in my own project?

The repository has no license, so all rights stay with Vike-n. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ECG Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards