Starbie

vincentchen18·starbie·Starbie/Starbie.kicad_pcb

Starbie PCB layout, top view — open source ESP32 board by vincentchen18

About the Starbie PCB

Starbie is an open source ESP32 PCB design by vincentchen18, published on GitHub. It is a 2-layer board measuring 140.3 × 97.3 mm, with 14 components from 11 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 4 resistors, 3 connectors, 3 switches, 2 ICs, 1 test point and 1 diode.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

my first hardware project (a desktop pet)

Starbie is a tiny motion controlled desktop pet, powered by USB or battery. It is a star-shaped PCB hosting a little digital creature on an OLED Screen. It includes multiple interactive functionalities. Tilt it to navigate menus, shake it to wake it up, and watch its mood light change as you neglect it. (you probably shouldn't neglect it but this is also a functionality, not a recommendation.) Also has multiple sensors that track gyroscopic and accelerometric position, as well as tracking temperature and humidity.

Starbie, from the project README
From the project README

Main components on the Starbie

Starbie bill of materials (BOM)

14 components, 11 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
1
Conn_01x02_Socket
J3
2
SW_Push
SW1, SW2
1
SW_SPDT
SW3
1
TestPoint
TP1
1
LED_RKGB
D1
1
10k
R1
3
220
R2, R3, R4

Starbie design files

The KiCad project lives in the vincentchen18/starbie repository on GitHub; these links point at the commit this page was built from.

Starbie: common questions

What microcontroller does the Starbie use?

The Starbie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Starbie PCB?

The Starbie measures 140.3 × 97.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Starbie?

14 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Starbie design files?

From the vincentchen18/starbie repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Starbie design in my own project?

The repository has no license, so all rights stay with vincentchen18. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Starbie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards