Garden Irrigation Motherboard
About the Garden Irrigation Motherboard PCB
Garden Irrigation Motherboard is an open source AVR/Arduino PCB design by vinthewrench, published on GitHub under the MIT license. It is a 2-layer board measuring 200 × 100 mm, with 88 components from 54 distinct parts.
Its main chip is the ATMEGA88PB-AU, from the AVR/Arduino family. Other key parts include the PC817, ULN2003A, ISO1541, PCA9615DP and DS9503P. By type, the board carries 25 resistors, 22 capacitors, 9 connectors, 8 ICs, 5 test points and 5 LEDs.
From the project
Hardware for Garden Irrigation Project
This repository contains the hardware designs for Farm Automation Made Easy as Pi.
- Garden Irrigation Board 3.4 - Garden Irrigation Plugin 2.0
Documentation and project articles are available on my Substack:
Vinnie’s Farm Automation Projects https://www.vinthewrench.com/p/vinnies-farm-automation-projects
Main components on the Garden Irrigation Motherboard
Garden Irrigation Motherboard bill of materials (BOM)
88 components, 54 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | PC817 | DIP-4_W7.62mm | U1, U4 |
| 1 | ATMEGA88PB-AU | TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | ULN2003A | DIP-16_W7.62mm | U3 |
| 1 | ISO1541 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | PCA9615DP | TSSOP-10_3x3mm_P0.5mm | U7 |
| 1 | DS9503P | TSOC-6_3.76x3.94mm_P1.27mm | U8 |
| 1 | DS2482S-100_ | SOIC-8_3.9x4.9mm_P1.27mm | U9 |
| 1 | Power Pole | powerpole | J1 |
| 1 | Mini‑Fit Jr | Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical | J2 |
| 1 | Conn_02x08_Odd_Even | PinSocket_2x08_P2.54mm_Vertical | J3 |
| 1 | Raspberry_Pi_4 | PI_mirrored | J5 |
| 1 | AVR-ISP-6 | PinHeader_2x03_P2.54mm_Vertical | J6 |
| 1 | Serial port | PinSocket_1x06_P2.54mm_Vertical | J7 |
| 1 | RJ45 | RJ45_Amphenol_54602-x08_Horizontal | J8 |
| 1 | 70551-0003 | 705510003 | J9 |
| 1 | Screw_Terminal_01x04 | TerminalBlock_Xinya_XY308-2.54-4P_1x04_P2.54mm_Horizontal | J10 |
| 1 | 696105003002 | 696105003002 | F2 |
| 1 | MF-R020-2 | MFR0202 | F3 |
| 1 | DSP1-L2-DC12V | DSP1-L2-DC12V | K1 |
| 1 | THN 30-2411WI THN_30-2411WI | THN302415WI | PS2 |
Show 34 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | D45V5F5 | D45V5F5 | PS3 |
| 1 | TEL 5-1212 TEL_5-1212 | TEL51210 | PS4 |
| 1 | D24V7F5 | D24V7F5 | PS5 |
| 1 | WAKE | SW_PUSH_6mm | SW1 |
| 1 | POWER OFF | SW_PUSH_6mm | SW2 |
| 1 | MCU RESET | SW_PUSH_6mm | SW3 |
| 1 | TestPoint GND PI | 5000 | TP1 |
| 1 | TestPoint +12 | 5000 | TP3 |
| 1 | TestPoint GND1 | 5000 | TP4 |
| 1 | TestPoint +5 ISO | 5000 | TP5 |
| 1 | TestPoint +5 PI | 5000 | TP6 |
| 1 | 5KP36CA | D_P600_R-6_P7.62mm_Vertical_KathodeUp | TVS1 |
| 1 | P6KE6.8A | D_DO-15_P12.70mm_Horizontal | TVS2 |
| 1 | TPD4S009DGSR | SOP50P490X110-10N | TVS3 |
| 4 | 151033GS03000 | LED_D3.0mm | LED1, LED2, LED3, LED4 |
| 1 | 151033RS03000 | LED_D3.0mm | LED5 |
| 1 | 1N4148WS | D_DO-35_SOD27_P7.62mm_Horizontal | D3 |
| 16 | .1uf | RCER71H104K0DBH03A | C1, C2, C3, C5, C6, C7, C10, C12 +8 |
| 1 | 10uf | CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 470uf | CP_Radial_D8.0mm_P3.50mm | C9 |
| 2 | 10uf | FA26NP02E223JNU06 | C11, C21 |
| 1 | 1000uf | CP_Radial_D10.0mm_P5.00mm | C22 |
| 1 | 10uf | CP_Radial_D8.0mm_P3.50mm | C23 |
| 2 | 220Ω | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 4 | 5.6K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R8, R16, R18 |
| 3 | 470Ω | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5, R12 |
| 1 | 20K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R6 |
| 2 | 4.7K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R7, R19 |
| 2 | 2.2K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R9, R13 |
| 3 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R14, R17, R22 |
| 1 | 220 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R15 |
| 4 | 390 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R23, R24, R27, R28 |
| 2 | 100 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R25, R26 |
| 1 | 3.3K | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R29 |
Garden Irrigation Motherboard design files
The KiCad project lives in the vinthewrench/GardenIrrigation repository on GitHub; these links point at the commit this page was built from.
Garden Irrigation Motherboard: common questions
What microcontroller does the Garden Irrigation Motherboard use?
The Garden Irrigation Motherboard is built around the ATMEGA88PB-AU, from the AVR/Arduino family.
How big is the Garden Irrigation Motherboard PCB?
The Garden Irrigation Motherboard measures 200 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Garden Irrigation Motherboard?
88 components, from 54 distinct parts. The full bill of materials is listed on this page.
Where can I download the Garden Irrigation Motherboard design files?
From the vinthewrench/GardenIrrigation repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Garden Irrigation Motherboard design in my own project?
Yes, under the terms of its MIT license, which vinthewrench chose for the repository.
Can I test firmware for the Garden Irrigation Motherboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in GardenIrrigation
Similar boards
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k
AVR/ArduinoMegadesk
gcormier
41.7 × 32.2 mm23 parts2LGPL-3.0818
AVR/ArduinoEasyduino Atmega Nano
Hanqaqa
43.4 × 18 mm30 parts4LCERN-OHL-P-2.0746