8 open source boards using the PCA9615DP

Real designs built with the PCA9615DP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the PCA9615DP

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the PCA9615DP connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin is left unconnected on 5 of 6 designs.
  • The VDD(A) pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 4.7 µF).
  • The SDA pin has a pull-up to 5V on 4 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ).
  • The SCL pin has a pull-up to 5V on 4 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ).
VDD(A)pin 1Connected to: 5V 100%
  • Decoupling capacitor on 67% · 100 nF (2), 4.7 µF (1), 10 µF (1)
SDApin 2Connected to: A connector 67%
  • Pull-up to 5V on 67% · 4.7 kΩ (3), 2.2 kΩ (1)
  • Series resistor on 33% · 220 Ω (1), 4.7 kΩ (1)
ENpin 3Connected to: Not connected 83% · a signal 17%
SCLpin 4Connected to: A connector 67%
  • Pull-up to 5V on 67% · 4.7 kΩ (3), 2.2 kΩ (1)
  • Series resistor on 33% · 220 Ω (1), 4.7 kΩ (1)
VSSpin 5Connected to: GND 100%
DSCLMpin 6Connected to: A connector 100%
  • Series resistor on 67% · 120 Ω (2), 100 Ω (2)
  • Resistor to GND on 67% · 600 Ω (2), 390 Ω (2)
DSCLPpin 7Connected to: A connector 100%
  • Pull-up to 5V on 67% · 600 Ω (2), 390 Ω (2)
  • Series resistor on 67% · 120 Ω (2), 100 Ω (2)
DSDAPpin 8Connected to: A connector 100%
  • Series resistor on 67% · 120 Ω (2), 100 Ω (2)
  • Pull-up to 5V on 50% · 600 Ω (2), 390 Ω (1)
DSDAMpin 9Connected to: A connector 100%
  • Series resistor on 67% · 120 Ω (2), 100 Ω (2)
  • Resistor to GND on 50% · 600 Ω (2), 390 Ω (1)
VDD(B)pin 10Connected to: 5V 83% · a signal 17%
  • Decoupling capacitor on 67% · 100 nF (2), 4.7 µF (1), 1 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Printhead pcb by Fiberprinter, I2c over rj45 by rmingon, Garden Irrigation Motherboard by vinthewrench and PicoChain Generic Reference Device Implementation by jasonalexander-ja.

The PCA9615DP in open source designs

The gallery holds 8 open source boards using the PCA9615DP from 6 GitHub repositories; a typical one measures about 67 × 34.5 mm and carries around 39 components.

75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Printhead pcb by Fiberprinter.

Microcontrollers on boards using the PCA9615DP

What boards using the PCA9615DP are built for

PCA9615DP: common questions

Where can I find a PCA9615DP reference design?

Each of the 8 boards on this page is a real design using the PCA9615DP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCA9615DP EN pin connected?

The EN pin is left unconnected on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the PCA9615DP.

What decoupling capacitors do designs use on the PCA9615DP VDD(A) pin?

The VDD(A) pin has a decoupling capacitor on 4 of 6 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the PCA9615DP.

What pull-up resistor is used on the PCA9615DP SDA pin?

The SDA pin has a pull-up to 5V on 4 of 6 designs, most often 4.7 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 6 open source designs using the PCA9615DP.

Which microcontrollers do boards using the PCA9615DP use?

Most are built on AVR/Arduino (1) and Raspberry Pi (1).

How big is a typical board using the PCA9615DP?

The median is 67 × 34.5 mm, and 75% are two-layer designs.

What is the most popular open source board using the PCA9615DP?

By GitHub stars, Printhead pcb by Fiberprinter, with 4 stars.

Can I simulate one of these boards using the PCA9615DP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part