2 open source boards using the DS2482S-100
Real designs built with the DS2482S-100, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32ESP 24V 16xIn/16xOut/1-Wire Module
thermseekr
108 × 67.8 mm318 parts4LCC-BY-NC-4.06
AVR/ArduinoGarden Irrigation Motherboard
vinthewrench
200 × 100 mm88 parts2LMIT2
The DS2482S-100 in open source designs
The gallery holds 2 open source boards using the DS2482S-100 from 2 GitHub repositories; a typical one measures about 154 × 83.9 mm and carries around 203 components.
50% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is ESP 24V 16xIn/16xOut/1-Wire Module by thermseekr.
Microcontrollers on boards using the DS2482S-100
DS2482S-100: common questions
Where can I find a DS2482S-100 reference design?
Each of the 2 boards on this page is a real design using the DS2482S-100. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the DS2482S-100 use?
Most are built on AVR/Arduino (1) and ESP32 (1).
How big is a typical board using the DS2482S-100?
The median is 154 × 83.9 mm, and 50% are two-layer designs.
What is the most popular open source board using the DS2482S-100?
By GitHub stars, ESP 24V 16xIn/16xOut/1-Wire Module by thermseekr, with 6 stars.
Can I simulate one of these boards using the DS2482S-100 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.