Esp32s3-gnss base station
vuquangtrong·esp32s3-gnss-base-station·hardware/esp32s3-gnss-base-station.kicad_pcb
About the Esp32s3-gnss base station PCB
Esp32s3-gnss base station is an open source PCB design by vuquangtrong, published on GitHub. It is a 4-layer board measuring 108 × 108 mm, with 49 components from 19 distinct parts.
Other key parts include the CP2102-GMR, TP4054 and SY8089AAAC. By type, the board carries 22 resistors, 14 capacitors, 5 LEDs, 3 ICs, 2 inductors and 1 transistor.
It belongs with the rf & radio, iot & wireless and usb & debug tools designs in this gallery.
From the project
GNSS Base Station using ESP32 for RTK position services
Design and build a RTK GNSS Base Station to provide precise positioning service, which sends RTCM messages over a self-hosted NTRIP web server or an external Radio module, supports micro SD Card storage for post-processing purposes.
This project is developed on top of ESP32-S3-WROOM-1-N16R8, with below specifications:
- Xtensa® dual-core 32-bit LX7 microprocessor with single precision FPU, up to 240 MHz - 384 KB ROM - 512 KB SRAM + 16 KB SRAM in RTC - Embedded 8 MB PSRAM (Octal SPI), up to 80 MHz - Integrated 16 MB Flash (Quad SPI), up to 80 MHz - 2.4 GHz Wi-Fi (802.11b/g/n, STA/AP/STA+AP…

Main components on the Esp32s3-gnss base station
Esp32s3-gnss base station bill of materials (BOM)
49 components, 19 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CP2102-GMR | WQFN-28_L5.0-W5.0-P0.50-BL-EP3.2 | U3 |
| 1 | TP4054 | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | U4 |
| 1 | SY8089AAAC | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U5 |
| 1 | MMDT3904 | SOT-363_L2.0-W1.3-P0.65-LS2.1-BR | Q1 |
| 1 | TF-001B | TF-SMD_TF-001B | SDCard1 |
| 1 | C404968 MICROQTJ | MICRO-USB-SMD_MICROQTJ-5P | USB1 |
| 5 | KT-0603R | LED0603-RD | LED1, LED2, LED3, LED4, LED5 |
| 1 | C96891 2.2uH 2A 52mΩ | IND-SMD_L4.0-W4.0 | L1 |
| 1 | C113123 120nH 110mA 2.66Ω | L0402 | L2 |
| 5 | 100NF 100nF | C0402 | C1, C3, C8, C10, C12 |
| 6 | 10UF 10uF | C0603 | C2, C4, C5, C9, C11, C13 |
| 2 | 22UF 22uF | C0805 | C6, C7 |
| 1 | 47PF 47pF | C0603 | C14 |
| 11 | 10K 10k | R0603 | R1, R2, R3, R4, R10, R13, R14, R15 +3 |
| 2 | 2.2K 2.2k | R0603 | R5, R6 |
| 4 | 1k | R0603 | R7, R20, R21, R22 |
| 3 | 150K 150k | R0603 | R8, R9, R12 |
| 1 | 680K 680k | R0603 | R11 |
| 1 | 33 | R0603 | R19 |
Esp32s3-gnss base station design files
The KiCad project lives in the vuquangtrong/esp32s3-gnss-base-station repository on GitHub; these links point at the commit this page was built from.
Esp32s3-gnss base station: common questions
How big is the Esp32s3-gnss base station PCB?
The Esp32s3-gnss base station measures 108 × 108 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Esp32s3-gnss base station?
49 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Esp32s3-gnss base station design files?
From the vuquangtrong/esp32s3-gnss-base-station repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Esp32s3-gnss base station design in my own project?
The repository has no license, so all rights stay with vuquangtrong. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kRPi RM0 WiFi/Bluetooth Module
schlae
11.1 × 14 mm76 parts6LNo license1.0kXG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675Radioberry juice
pa3gsb
65 × 56 mm87 parts2LNo license675