Unzahl

waffle87·unzahl

Unzahl PCB layout, top view — open source STM32 board by waffle87

About the Unzahl PCB

Unzahl is an open source STM32 PCB design by waffle87, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 228.4 × 85 mm, with 150 components from 25 distinct parts.

Its main chip is the STM32G431KBUX, from the STM32 family. Other key parts include the XC6206PXXXMR, SRV05-4, W25Q128JVS, 74HC595 and SN74LVC1T45DRL. By type, the board carries 48 diodes, 34 LEDs, 11 capacitors, 8 resistors, 6 ICs and 4 switches.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

Integrated STM32G0B1 Keyboard PCB

A Le Chiffre compatible PCB with some added features.

1. Upload the gerber files from production/gerbers.zip 2. Set PCB quantity and colour as desired 3. For PCB assembly, choose Economic PCBA type and Bottom Side for assembly side 4. Upload the BOM and CPL files 5. Ensure the correct components have been selected, and all are in stock. An effort has been made to choose as few extended components as possible, but this is not possible for some. 6. Give a quick look at the component placement and make sure nothing looks wildly wrong. It is normal for some components to be shown oriented…

Main components on the Unzahl

Unzahl bill of materials (BOM)

150 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XC6206PXXXMR
XC6206PxxxMR
U1
1
STM32G431KBUX
STM32G431KBUx
U2
1
SRV05-4
U3
1
W25Q128JVS
U4
1
74HC595
U5
1
SN74LVC1T45DRL
U6
1
DTC123J
Q1
1
USB_C_RECEPTACLE_USB2.0_14P
USB_C_Receptacle_USB2.0_14P
J1
1
Conn_01x04
J2
1
500MA
500mA
F1
35
C41430893
MX_SW_HS
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +27
2
MX_stab
S1, S2
1
RotaryEncoder_Switch
SW1
1
SW_Push
SW2
34
MX_SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +26
36
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +28
12
WS2812B
D36, D37, D38, D39, D40, D41, D42, D43 +4
6
100N
100n
C1, C2, C8, C9, C10, C14
1
4.7U
4.7u
C3
2
1u
C4, C5
Show 5 more
QtyPartRefs
1
4.7N
4.7n
C6
1
10U
10u
C7
5
10K
10k
R1, R2, R5, R7, R8
2
5.1K
5.1k
R3, R4
1
100K
100k
R6

Unzahl design files

The KiCad project lives in the waffle87/unzahl repository on GitHub; these links point at the commit this page was built from.

Unzahl: common questions

What microcontroller does the Unzahl use?

The Unzahl is built around the STM32G431KBUX, from the STM32 family.

How big is the Unzahl PCB?

The Unzahl measures 228.4 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Unzahl?

150 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Unzahl design files?

From the waffle87/unzahl repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Unzahl design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which waffle87 chose for the repository.

Can I test firmware for the Unzahl without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards