17 open source boards using the SN74LVC1T45DRL
Real designs built with the SN74LVC1T45DRL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
Peacock
george-norton
172 × 152.9 mm74 parts2LCERN-OHL-S-2.0307RP2040/RP2350
Sweep
waffle87
216.9 × 86.9 mm208 parts2LSHL-2.157RP2040/RP2350
Raii
unspecworks
236.9 × 86.9 mm208 parts2LSHL-2.117RP2040/RP2350
Ortho
onisage
190.5 × 76.2 mm113 parts2LMIT8Nordic nRF
Dcmini
dcmini-org
127 × 86.5 mm189 parts2LCERN-OHL-P-2.07RP2040/RP2350
NuBoard IC Investigator
wickerwaka
141.7 × 105.1 mm375 parts6LNo license1ESP32
Lamp-2
DodoZimmermann
147 × 139.9 mm248 parts6LMIT0STM32
Unzahl
waffle87
228.4 × 85 mm150 parts2LCERN-OHL-P-2.00RP2040/RP2350
SlimDash rev1
mizma
157.1 × 131.5 mm137 parts2LCC-BY-SA-4.00ESP32
ESP32-C6-IoT
rappepi
20 × 41.5 mm73 parts4LCC-BY-NC-4.00RP2040/RP2350
Ortho hs
onisage
190.5 × 76.2 mm113 parts2LMIT8RP2040/RP2350
SlimDash rev1-kicad rounded
mizma
157.1 × 131.5 mm137 parts2LCC-BY-SA-4.00RP2040/RP2350
Alpha
onisage
190.5 × 76.2 mm111 parts2LMIT8RP2040/RP2350
Alpha hs
onisage
190.5 × 76.2 mm111 parts2LMIT8RP2040/RP2350
Trad
onisage
190.5 × 76.2 mm109 parts2LMIT8RP2040/RP2350
Trad hs
onisage
190.5 × 76.2 mm109 parts2LMIT8Clock Buffer
wickerwaka
3.9 × 2 mm5 parts6LNo license1
How designs wire the SN74LVC1T45DRL
Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the SN74LVC1T45DRL connects to, and the resistors, capacitors and other passives placed on it.
- The VCCA pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF).
- The VCCB pin has a decoupling capacitor on 5 of 10 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCApin 1 | Connected to: 3.3V 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| Bpin 4 | Connected to: The microcontroller 30% |
|
| VCCBpin 6 | Connected to: 5V 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Peacock by george-norton, Sweep by waffle87, Raii by unspecworks and Alpha by onisage.
The SN74LVC1T45DRL in open source designs
The gallery holds 17 open source boards using the SN74LVC1T45DRL from 10 GitHub repositories; a typical one measures about 190.5 × 85 mm and carries around 113 components.
76% are two-layer designs, the rest use four layers or more, and 71% carry an open source license.
The most starred is Peacock by george-norton.
Parts used alongside the SN74LVC1T45DRL
Microcontrollers on boards using the SN74LVC1T45DRL
What boards using the SN74LVC1T45DRL are built for
SN74LVC1T45DRL: common questions
Where can I find a SN74LVC1T45DRL reference design?
Each of the 17 boards on this page is a real design using the SN74LVC1T45DRL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1T45DRL VCCA pin?
The VCCA pin has a decoupling capacitor on 7 of 10 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 10 open source designs using the SN74LVC1T45DRL.
What decoupling capacitors do designs use on the SN74LVC1T45DRL VCCB pin?
The VCCB pin has a decoupling capacitor on 5 of 10 designs, most often 100 nF. Counted from the KiCad layouts of 10 open source designs using the SN74LVC1T45DRL.
What parts are used alongside the SN74LVC1T45DRL?
The RP2040, W25Q128JVS, SRV05-4, XC6206PXXXMR and INA138 appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC1T45DRL use?
Most are built on RP2040/RP2350 (12), ESP32 (2), Nordic nRF (1) and STM32 (1).
How big is a typical board using the SN74LVC1T45DRL?
The median is 190.5 × 85 mm, and 76% are two-layer designs.
What is the most popular open source board using the SN74LVC1T45DRL?
By GitHub stars, Peacock by george-norton, with 307 stars.
Can I simulate one of these boards using the SN74LVC1T45DRL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.