Tubes Mk.
wangga03·Tugas-Akhir·Main-Board/Tubes Mk. PCB/Tubes Mk. PCB/Tubes Mk. PCB.kicad_pcb
About the Tubes Mk. PCB
Tubes Mk. is an open source ESP32 PCB design by wangga03, published on GitHub. It is a 4-layer board measuring 100 × 81.5 mm, with 77 components from 23 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the PC817X4J000F and HT7333. By type, the board carries 24 resistors, 12 capacitors, 8 switches, 6 ICs, 6 transistors and 6 connectors.
From the project
Berisi tentang board unbtuk AUV Halo test branch
Main components on the Tubes Mk.
Tubes Mk. bill of materials (BOM)
77 components, 23 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-WROOM-32 | MODULE_ESP32-WROOM-32 | IC1 |
| 4 | PC817X4J000F PC817 | DIL04 | IC2, IC3, IC4, IC5 |
| 1 | HT7333 | IC_HT7333 | U1 |
| 6 | BC847B | SOT100P230X110-3N | Q1, Q2, Q3, Q4, Q5, Q6 |
| 1 | Screw_Terminal_2_P5.00mm | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
| 1 | FTDI Pins | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 4 | Terminal Block | TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal | J3, J4, J5, J6 |
| 4 | SRD-05VDC-SL-C | RELAY_SRD-05VDC-SL-C | K1, K2, K3, K4 |
| 1 | HLK-10M05 | CONV_HLK-10M05 | PS1 |
| 4 | B3W-1020 | SW_B3W-1020_OMR | S1, S2, S3, S4 |
| 4 | PINHD_1x2_Male | PinHeader_1x02_P2.54mm_Vertical | SW1, SW2, SW3, SW4 |
| 5 | LED_0805_Red | LED_0805_2012Metric | LED1, LED2, LED3, LED4, LED5 |
| 4 | 1N4007_SMD | D_SMA | D1, D2, D3, D4 |
| 1 | PESD5V0S1BA | D_SOD-323_TVS | D5 |
| 8 | 100nF | C_0805_2012Metric | C1, C3, C6, C7, C8, C9, C10, C11 |
| 3 | 10uF | C_0805_2012Metric | C2, C4, C5 |
| 1 | 220uF_25V | CP_Radial_D8.0mm_P3.50mm | C12 |
| 8 | 220R | R_0805_2012Metric | R1, R3, R9, R11, R14, R16, R17, R19 |
| 4 | DNP | R_0805_2012Metric | R2, R10, R15, R18 |
| 3 | 12K | R_0805_2012Metric | R4, R12, R13 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 1K | R_0805_2012Metric | R5, R7, R8, R24 |
| 1 | 470R | R_0805_2012Metric | R6 |
| 4 | 10K | R_0805_2012Metric | R20, R21, R22, R23 |
Tubes Mk. design files
The KiCad project lives in the wangga03/Tugas-Akhir repository on GitHub; these links point at the commit this page was built from.
Tubes Mk.: common questions
What microcontroller does the Tubes Mk. use?
The Tubes Mk. is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the Tubes Mk. PCB?
The Tubes Mk. measures 100 × 81.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Tubes Mk.?
77 components, from 23 distinct parts. The full bill of materials is listed on this page.
Where can I download the Tubes Mk. design files?
From the wangga03/Tugas-Akhir repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Tubes Mk. design in my own project?
The repository has no license, so all rights stay with wangga03. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Tubes Mk. without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in Tugas-Akhir
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k