PSUtap analog
WEEE-Open·psutap·PSUtap_analog/PSUtap_analog.kicad_pcb
About the PSUtap analog PCB
PSUtap analog is an open source PCB design by WEEE-Open, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 92 × 70.1 mm, with 61 components from 20 distinct parts.
Other key parts include the AD7708 and LT6105. By type, the board carries 30 resistors, 19 capacitors, 6 ICs, 1 crystal and 1 connector.
It belongs with the power & battery and usb & debug tools designs in this gallery.
From the project
Device for PSU power lines inspection and monitoring
The three are connected through male/female headers and communicate through an SPI interface.
Main components on the PSUtap analog
PSUtap analog bill of materials (BOM)
61 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD7708 | SOIC-28W_7.5x18.7mm_P1.27mm | U1 |
| 5 | LT6105 | MSOP-8_3x3mm_P0.65mm | U2, U3, U4, U5, U6 |
| 1 | 32.768kHz | Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm_HandSoldering | Y1 |
| 1 | Conn_to_digital_board | PinSocket_1x12_P2.54mm_Vertical | J1 |
| 2 | Conn_02x02_Top_Bottom | Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical | MoBo_4pin1, PSU_4pin1 |
| 2 | Conn_02x12_Top_Bottom | Molex_Mini-Fit_Jr_5566-24A_2x12_P4.20mm_Vertical | MoBo_ATX1, PSU_ATX1 |
| 10 | 10n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 7 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C11, C12, C13, C14, C15, C16, C17 |
| 2 | 10p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C18, C19 |
| 2 | 33k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 3 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3, R4, R5 |
| 4 | 4.7k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6, R7, R21, R30 |
| 3 | 3.3k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R8, R9, R10 |
| 4 | 330 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R11, R17, R23, R27 |
| 4 | 150 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R12, R18, R24, R28 |
| 2 | 120 | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R13, R19 |
| 4 | 2m | R_2512_6332Metric_Pad1.52x3.35mm_HandSolder | R14, R15, R25, R26 |
| 1 | 20m | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R16 |
| 2 | 8.2k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R20, R29 |
| 1 | 1.5k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R22 |
PSUtap analog design files
The KiCad project lives in the WEEE-Open/psutap repository on GitHub; these links point at the commit this page was built from.
PSUtap analog: common questions
How big is the PSUtap analog PCB?
The PSUtap analog measures 92 × 70.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PSUtap analog?
61 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the PSUtap analog design files?
From the WEEE-Open/psutap repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PSUtap analog design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which WEEE-Open chose for the repository.
More boards in psutap
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k