PSUtap eval LT6105
WEEE-Open·psutap·PSUtap_eval_LT6105/PSUtap_eval_LT6105.kicad_pcb
About the PSUtap eval LT6105 PCB
PSUtap eval LT6105 is an open source PCB design by WEEE-Open, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 29 × 19.3 mm, with 9 components from 8 distinct parts.
Other key parts include the LT6105-Amplifier_Current. By type, the board carries 4 resistors, 2 capacitors, 1 IC and 1 connector.
It belongs with the power & battery and usb & debug tools designs in this gallery.
From the project
Device for PSU power lines inspection and monitoring
The three are connected through male/female headers and communicate through an SPI interface.
Main components on the PSUtap eval LT6105
PSUtap eval LT6105 bill of materials (BOM)
9 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LT6105-Amplifier_Current | MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | 10k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 1m | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 1 | 20m | R_2512_6332Metric_Pad1.40x3.35mm_HandSolder | R1 |
| 2 | 120 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3 |
| 1 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
PSUtap eval LT6105 design files
The KiCad project lives in the WEEE-Open/psutap repository on GitHub; these links point at the commit this page was built from.
PSUtap eval LT6105: common questions
How big is the PSUtap eval LT6105 PCB?
The PSUtap eval LT6105 measures 29 × 19.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PSUtap eval LT6105?
9 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the PSUtap eval LT6105 design files?
From the WEEE-Open/psutap repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PSUtap eval LT6105 design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which WEEE-Open chose for the repository.
More boards in psutap
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k