AD7708 eval board
WEEE-Open·psutap·PSUtap_eval_AD7708/PSUtap_eval_AD7708.kicad_pcb
About the AD7708 eval board
AD7708 eval board is an open source PCB design by WEEE-Open, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 55.9 × 48.3 mm, with 28 components from 12 distinct parts.
Other key parts include the AD7708-Analog_ADC-PSUtap_analog-rescue and AD780ANZ. By type, the board carries 19 capacitors, 3 connectors, 2 ICs, 2 resistors, 1 crystal and 1 switch.
It belongs with the power & battery, dev boards & breakouts and usb & debug tools designs in this gallery.
From the project
Device for PSU power lines inspection and monitoring
The three are connected through male/female headers and communicate through an SPI interface.
Main components on the AD7708 eval board
AD7708 eval board bill of materials (BOM)
28 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AD7708-Analog_ADC-PSUtap_analog-rescue | SOIC-28W_7.5x18.7mm_P1.27mm | U1 |
| 1 | AD780ANZ | SSOP-8_3.9x5.05mm_P1.27mm | U2 |
| 1 | Device_Crystal_Small | Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm_HandSoldering | Y1 |
| 1 | Analog_Inputs | PinSocket_2x10_P2.54mm_Vertical | J1 |
| 1 | Conn_01x02 | PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x10_Female | PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | SW_Push | SW_SPST_B3U-1000P | SW1 |
| 13 | 100n | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C2, C3, C4, C5, C6, C7, C8 +5 |
| 4 | 10u | C_0805_2012Metric | C11, C13, C17, C19 |
| 2 | 10p | C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C15, C16 |
| 1 | 1M | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | 10k | R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2 |
AD7708 eval board design files
The KiCad project lives in the WEEE-Open/psutap repository on GitHub; these links point at the commit this page was built from.
AD7708 eval board: common questions
How big is the AD7708 eval board?
The AD7708 eval board measures 55.9 × 48.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AD7708 eval board?
28 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the AD7708 eval board design files?
From the WEEE-Open/psutap repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the AD7708 eval board design in my own project?
Yes, under the terms of its CERN-OHL-W-2.0 license, which WEEE-Open chose for the repository.
More boards in psutap
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k