90s handheld game
weiccc24·90s-handheld-game·Documentation/game_circuit_diagram.kicad_sch

About the 90s handheld game PCB
90s handheld game is an open source ESP32 PCB design by weiccc24, published on GitHub. It is a board, with 6 components from 6 distinct parts.
Its main chip is the Xiao ESP32C3, from the ESP32 family. Other key parts include the ADXL345. By type, the board carries 2 ICs, 2 switches, 1 battery holder and 1 diode.
It belongs with the displays & leds, power & battery and sensors designs in this gallery.
From the project
Reactor Core is a 90s-style handheld electronic game powered by a Seeed Xiao ESP32C3 that challenges players to stabilize a volatile nuclear reactor by performing rapid physical actions—like twisting, shaking, and tapping—within a shrinking time limit.
Reactor Core is an embedded electronic handheld game inspired by 90s classics like Bop-It and Brain Warp. Built as a final project for Sensors & Circuits at University of Washington, this device challenges players to stabilize a volatile nuclear reactor by physically manipulating the device in response to rapid-fire commands.
The goal is simple: keep the reactor stable. The screen will display a command, and you must perform the action within the time limit.
Main components on the 90s handheld game
90s handheld game bill of materials (BOM)
6 components, 6 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Xiao ESP32C3 | U1 | |
| 1 | ADXL345 | U2 | |
| 1 | Battery_Cell | BT1 | |
| 1 | RotaryEncoder_Switch | SW1 | |
| 1 | SW_DPST_x2 | SW2 | |
| 1 | NeoPixel_THT | D1 |
90s handheld game design files
The KiCad project lives in the weiccc24/90s-handheld-game repository on GitHub; these links point at the commit this page was built from.
90s handheld game: common questions
What microcontroller does the 90s handheld game use?
The 90s handheld game is built around the Xiao ESP32C3, from the ESP32 family.
How many components are on the 90s handheld game?
6 components, from 6 distinct parts. The full bill of materials is listed on this page.
Where can I download the 90s handheld game design files?
From the weiccc24/90s-handheld-game repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the 90s handheld game design in my own project?
The repository has no license, so all rights stay with weiccc24. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the 90s handheld game without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k