Raspberry Pi Pico Logger

WestianPKl·Logger_Dashboard·docs/PCB/PicoLogger/Pico_TH_Logger_SMD_PCF8563T_2.1/PicoLogger_Small.kicad_pcb

Raspberry Pi Pico Logger PCB layout, top view — open source RP2040/RP2350 board by WestianPKl

About the Raspberry Pi Pico Logger PCB

Raspberry Pi Pico Logger is an open source RP2040/RP2350 PCB design by WestianPKl, published on GitHub. It is a 2-layer board measuring 51.5 × 83 mm, with 33 components from 22 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the MCP7940N-xSN. By type, the board carries 10 resistors, 7 capacitors, 4 connectors, 4 diodes, 2 switches and 1 IC.

It belongs with the sensors and iot & wireless designs in this gallery.

From the project

A full-stack IoT monitoring platform for collecting, visualizing, and managing environmental sensor data from distributed devices. The system integrates custom-built hardware (ESP32, STM32, MicroPython nodes) with a modern web dashboard, communicating over MQTT and WebSockets for

A full-stack IoT monitoring platform for collecting, visualizing, and managing environmental sensor data from distributed devices. The system integrates custom-built hardware (ESP32, STM32, MicroPython nodes) with a modern web dashboard, communicating over MQTT and WebSockets for real-time data streaming.

- Overview - Architecture - Technology Stack - Features - Project Structure - Backend - Frontend - Logger Firmware - Database - Authentication & Authorization - MQTT Communication - Hardware - Getting Started - Environment Variables - API Reference - Testing

Main components on the Raspberry Pi Pico Logger

Raspberry Pi Pico Logger bill of materials (BOM)

33 components, 22 distinct parts.

QtyPartRefs
1
MCP7940N-xSN
U1
1
RaspberryPi_Pico
A1
1
BC817-40-DIO
Q1
1
QT3CD-32.768KEZY-T
Y1
1
LCD 16x2
J1
1
Additional connector
J2
1
SPI
J3
1
Sensor
J4
1
CR2032
BT1
1
Buzzer 5V 12mm
BZ1
2
Tact Switch 6x6mm / 13mm
SW1, SW2
1
M7-DIO
D1
1
OSTBPCS2C2B
D2
2
LL4148-DIO
D3, D4
5
100nF
C1, C4, C5, C6, C7
2
12pF
C2, C3
3
4k7R
R1, R2, R3
1
200kR
R4
1
68kR
R5
1
0R
R6
Show 2 more
QtyPartRefs
1
1kR
R7
3
330R
R8, R9, R10

Raspberry Pi Pico Logger design files

The KiCad project lives in the WestianPKl/Logger_Dashboard repository on GitHub; these links point at the commit this page was built from.

Raspberry Pi Pico Logger: common questions

What microcontroller does the Raspberry Pi Pico Logger use?

The Raspberry Pi Pico Logger is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How big is the Raspberry Pi Pico Logger PCB?

The Raspberry Pi Pico Logger measures 51.5 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Raspberry Pi Pico Logger?

33 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Raspberry Pi Pico Logger design files?

From the WestianPKl/Logger_Dashboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Raspberry Pi Pico Logger design in my own project?

The repository has no license, so all rights stay with WestianPKl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Raspberry Pi Pico Logger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in Logger_Dashboard

Similar boards