IoT Logger C

WestianPKl·Logger_Dashboard·docs/PCB/PicoLogger/IoT_Logger_C_1.0/IoT_Logger_C_1.0.kicad_pcb

IoT Logger C PCB layout, top view — open source ESP32 board by WestianPKl

About the IoT Logger C PCB

IoT Logger C is an open source ESP32 PCB design by WestianPKl, published on GitHub. It is a 2-layer board measuring 94.7 × 71.8 mm, with 97 components from 52 distinct parts.

Its main chip is the ESP32-C6-WROOM-1U, from the ESP32 family. Other key parts include the ATmega328PB-A, AP63200WU, PCA9306DCUR, TPD2EUSB30 and MCP7940N-xSN. By type, the board carries 33 resistors, 29 capacitors, 7 ICs, 7 connectors, 5 diodes and 4 switches.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

A full-stack IoT monitoring platform for collecting, visualizing, and managing environmental sensor data from distributed devices. The system integrates custom-built hardware (ESP32, STM32, MicroPython nodes) with a modern web dashboard, communicating over MQTT and WebSockets for

A full-stack IoT monitoring platform for collecting, visualizing, and managing environmental sensor data from distributed devices. The system integrates custom-built hardware (ESP32, STM32, MicroPython nodes) with a modern web dashboard, communicating over MQTT and WebSockets for real-time data streaming.

- Overview - Architecture - Technology Stack - Features - Project Structure - Backend - Frontend - Logger Firmware - Database - Authentication & Authorization - MQTT Communication - Hardware - Getting Started - Environment Variables - API Reference - Testing

Main components on the IoT Logger C

IoT Logger C bill of materials (BOM)

97 components, 52 distinct parts.

QtyPartRefs
1
ATmega328PB-A
U1
1
ESP32-C6-WROOM-1U
U2
1
AP63200WU
U3
1
PCA9306DCUR
U4
1
TPD2EUSB30
U5
1
MCP7940N-xSN
U6
1
FM24CL16B
U7
2
BSS138
Q1, Q3
1
BC817-40-DIO
Q2
1
16.00M-SMDXT324
Y1
1
QT3CD-32.768KEZY-T
Y2
1
AVR-ISP-10
J1
1
ESP_UART
J2
1
USB-C
J3
1
Sensor
J4
1
LCD 16x2
J5
1
SPI
J6
1
CON
J7
1
CR2032
BT1
1
Buzzer 5V 12mm
BZ1
Show 32 more
QtyPartRefs
1
1A
F1
1
Jumper_2_Bridged
JP1
4
Tact Switch 6x6mm / 13mm
SW1, SW2, SW3, SW4
1
SMF5.0A
D1
1
M7-DIO
D2
3
LED
D3, D4, D5
1
CBM04YTAG601
FB1
1
600 Ω@100 MHz
L1
1
DR73-6R8-R
L2
15
100nF
C1, C2, C4, C7, C9, C10, C12, C18 +7
2
1uF
C3, C5
2
22pF
C6, C8
1
22uF
C11
1
10uF
C13
1
100nF
C14
1
100pF
C15
2
22uF
C16, C17
1
10uF
C20
1
1nF
C25
2
12pF
C27, C28
3
10kR
R1, R4, R5
6
1kR
R2, R16, R22, R23, R24, R31
5
100kR
R3, R25, R28, R29, R32
2
22R
R6, R7
4
100R
R8, R9, R26, R27
1
182kR
R10
1
62kR
R11
6
4k7R
R12, R13, R14, R15, R30, R33
2
5k1R
R17, R18
1
200kR
R19
1
68kR
R20
1
0R
R21

IoT Logger C design files

The KiCad project lives in the WestianPKl/Logger_Dashboard repository on GitHub; these links point at the commit this page was built from.

IoT Logger C: common questions

What microcontroller does the IoT Logger C use?

The IoT Logger C is built around the ESP32-C6-WROOM-1U, from the ESP32 family.

How big is the IoT Logger C PCB?

The IoT Logger C measures 94.7 × 71.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the IoT Logger C?

97 components, from 52 distinct parts. The full bill of materials is listed on this page.

Where can I download the IoT Logger C design files?

From the WestianPKl/Logger_Dashboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the IoT Logger C design in my own project?

The repository has no license, so all rights stay with WestianPKl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the IoT Logger C without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Logger_Dashboard

Similar boards