Raspberry Pi Pico Logger - Relay

WestianPKl·Logger_Dashboard·docs/PCB/PicoLogger/Pico_TH_Logger_Relay_SMD_PCF8563T_2.1/PicoLogger.kicad_pcb

Raspberry Pi Pico Logger - Relay PCB layout, top view — open source Raspberry Pi board by WestianPKl

About the Raspberry Pi Pico Logger - Relay PCB

Raspberry Pi Pico Logger - Relay is an open source Raspberry Pi PCB design by WestianPKl, published on GitHub. It is a 2-layer board measuring 100.5 × 83 mm, with 77 components from 34 distinct parts.

Its main chip is the RaspberryPi_Pico_W, from the Raspberry Pi family. Other key parts include the LTV-817S-TA1-C and MCP7940N-xSN. By type, the board carries 22 resistors, 15 capacitors, 12 diodes, 8 connectors, 5 ICs and 5 transistors.

It belongs with the sensors and iot & wireless designs in this gallery.

From the project

A full-stack IoT monitoring platform for collecting, visualizing, and managing environmental sensor data from distributed devices. The system integrates custom-built hardware (ESP32, STM32, MicroPython nodes) with a modern web dashboard, communicating over MQTT and WebSockets for

A full-stack IoT monitoring platform for collecting, visualizing, and managing environmental sensor data from distributed devices. The system integrates custom-built hardware (ESP32, STM32, MicroPython nodes) with a modern web dashboard, communicating over MQTT and WebSockets for real-time data streaming.

- Overview - Architecture - Technology Stack - Features - Project Structure - Backend - Frontend - Logger Firmware - Database - Authentication & Authorization - MQTT Communication - Hardware - Getting Started - Environment Variables - API Reference - Testing

Main components on the Raspberry Pi Pico Logger - Relay

Raspberry Pi Pico Logger - Relay bill of materials (BOM)

77 components, 34 distinct parts.

QtyPartRefs
4
LTV-817S-TA1-C
U1, U2, U3, U4
1
MCP7940N-xSN
U5
1
RaspberryPi_Pico_W
A1
4
BC847B-DIO
Q1, Q2, Q3, Q4
1
BC817-40-DIO
Q5
1
QT3CD-32.768KEZY-T
Y1
1
Sensor
J1
1
LCD 16x2
J2
1
Additional connector
J3
1
SPI
J4
1
ARK KF301 raster 5.0mm 3 pin
J5
3
ARK KF301 raster 5,0mm 3 pin
J6, J7, J8
1
CR2032
BT1
1
Buzzer 5V 12mm
BZ1
4
G5Q-14-EU-5DC
K1, K2, K3, K4
2
Tact Switch 6x6mm / 13mm
SW1, SW2
4
1N4007 M7
D1, D2, D3, D4
4
LED
D5, D6, D7, D8
1
M7-DIO
D9
1
OSTBPCS2C2B
D10
Show 14 more
QtyPartRefs
1
LL4148-DIO
D11
1
LED
D12
9
100nF
C1, C3, C5, C7, C9, C12, C13, C14 +1
4
1uF
C2, C4, C6, C8
2
12pF
C10, C11
4
2k2R
R1, R2, R7, R8
4
680R
R3, R4, R9, R10
4
10kR
R5, R6, R11, R12
3
4k7R
R13, R14, R15
1
200kR
R16
1
68kR
R17
1
0R
R18
1
1kR
R19
3
330R
R20, R21, R22

Raspberry Pi Pico Logger - Relay design files

The KiCad project lives in the WestianPKl/Logger_Dashboard repository on GitHub; these links point at the commit this page was built from.

Raspberry Pi Pico Logger - Relay: common questions

What microcontroller does the Raspberry Pi Pico Logger - Relay use?

The Raspberry Pi Pico Logger - Relay is built around the RaspberryPi_Pico_W, from the Raspberry Pi family.

How big is the Raspberry Pi Pico Logger - Relay PCB?

The Raspberry Pi Pico Logger - Relay measures 100.5 × 83 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Raspberry Pi Pico Logger - Relay?

77 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the Raspberry Pi Pico Logger - Relay design files?

From the WestianPKl/Logger_Dashboard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Raspberry Pi Pico Logger - Relay design in my own project?

The repository has no license, so all rights stay with WestianPKl. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Raspberry Pi Pico Logger - Relay without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in Logger_Dashboard

Similar boards